John Deere H130
Double tap to zoom
Quik-Park™ loader mounting system
The H130 Loader is designed for easy removal/mounting to/from the tractor without tools.
The parking stand is attached to the mast and lowers into position by moving the joystick to the raise position once the latches are opened to allow the loader to move to the park position.
End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points
The unique offset head design eliminates cross-pins and cotter pins to retain the pin.
A nut ensures the pins remain in position.
A lubrication groove provides a path for lubrication.
End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.
Fits the following models: 2025R and 2032R
|Front tire||23X8.50-12 6PR R4|
|Rear tire||12-16.5 6PR R4|
|Front axle configuration||---|
|Wheelbase||1600 mm (63.0 in.)|
|Pump capacity||12.7 L/min (3.35 gpm)|
|Rated pressure||166.9 bar (2421 psi)|
|Leveling configuration||Non-Self Leveling|
|Bucket used||1250 pin-on mm (49 pin-on in.)|
|Bucket weight||70.2 kg (154.4 lb)|
|Lift capacity at full height||Measured at pivot (U) 465 kg (1023 lb); Measured at 500 mm ahead of pivot (V) 325 kg (715 lb)|
|Lift capacity at 59 in. (1500 mm)||Measured at pivot (W) 567 kg (1247 lb); Measured at 500 mm ahead of pivot (X) 416 kg (915 lb)|
|Boom breakout force||Measured at pivot (Y) 1140 kg (2508 lb); Measured at 500 mm ahead of pivot (Z) 734 kg (1615 lb)|
|Bucket rollback force capacity||At maximum height (VV) 749 kgf (1648 lb); fAt 59-in. (1500-mm) lift height (XX) 931 kgf (2048 lbf); At ground-level line (ZZ) 785 kgf (1727 lbf)|
|Dimensions||Maximum lift height (A) 1999 mm (78.7 in.); At full height - bucket level(B) 1838 mm (72.4 in.); At full height - bucket dumped (C) 1570 mm (61.8 in.)|
|Overall length (I+F), ft (m)||2.8 m (9.3 ft)|
|Overall height in carry position (J)||1.2 m (3.9 ft)|
|Digging depth (H)||93 mm (3.7 in.)|
|Reach||At maximum height (D) 625 mm (24.6 in.) At ground level - bucket level (F) 1225 mm (48.2 in.)|
|Bucket angle||Dump angle, degrees (E); 38 degree (angle)Rollback angle, degrees (G); 24.5 degree (angle)Dump angle, ground; 118 degree (angle)|
|Cycle times||Loader raise seconds, 4.73 seconds; Loader lower seconds, 2.88 seconds; Bucket dump seconds; 4.73 (without regen)/1.85 (with regen) seconds; Bucket rollback seconds 2.88 seconds|