John Deere H120

Features
End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points
The unique offset head design eliminates cross-pins and cotter pins to retain the pin.
A nut ensures the pins remain in position.
A lubrication groove provides a path for lubrication.
End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.
Easily remove and mount loader to and from the tractor without tools
The Quik-Park mounting system on the H120 Loader is designed for easy removal and mounting to and from the tractor without tools.
Similar to that of the H130 and former 200CX Loaders, the H120’s parking stand is attached to the mast. To lower it into the park position, simply move the joystick to the raise position once the latches are opened.
Specifications
TRACTOR | --- |
Model | 1025R/1023E/1026R Tractor |
Front tire | 18x8.5-10 4PR R4 |
Rear tire | 26x12.00-12 4PR R4 |
Wheelbase | 1450 mm (57 in.) |
Pump capacity | 3.5 gpm |
Rated pressure | 1987 psi |
LOADER | --- |
Bucket used | Pin On Materials 1250 mm (49 in.) |
Bucket weight | 51 kg (112 lb) |
Lift capacity at full height | Measured at pivot (U) 319 kg (703 lb); Measured at 500 mm ahead of pivot (V) 232 kg (512 lb) |
Lift capacity at 59 in. (1500 mm) | Measured at pivot (W) 331 kg (729 lb); Measured at 500 mm ahead of pivot (X) 262 kg (578 lb) |
Boom breakout force | Measured at pivot (Y) 782 kg (1725 lb); Measured at 500 mm ahead of pivot (Z) 595 kg (1311 lb) |
Bucket rollback force capacity | At maximum height (VV) 763 kg (1682 lb); At 59-in. (1500-mm) lift height (XX) 789 kg (1739 lb); At ground-level line (ZZ) 867 kg (1911 lb) |
Dimensions | Maximum lift height (A) 1809 mm (71.2 in.); At full height - bucket level(B) 1653 mm (65.1 in.); At full height - bucket dumped (C) 1371 mm (54 in.) |
Overall length (I+F), ft (m) | 2.6 m (8.6 ft) |
Digging depth (H) | -101 mm (-4.0 in.) |
Reach | At maximum height (D) 571 mm (22.5 in.) At ground level - bucket level (F) 1176 mm (46.3 in.) |
Bucket angle | Dump angle, degrees (E), -40.1 degree (angle)Rollback angle, degrees (G), 31.2 degree (angle)Dump angle, ground, -114.0 degree (angle) |
Cycle times | Loader raise, seconds, 4.0 seconds; Loader lower, seconds, 2.5 seconds; Bucket dump, seconds, 5.7 (without regen)/2.2 (with regen) seconds; Bucket rollback, seconds 3.5 seconds |