John Deere D160

Double tap to zoom



End-of-pin lubrication - Easy maintenance

All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. No more searching for grease points that are hard to find. Removing the grease gun from the grease fitting is not a problem as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting.


Fits the following models: 3025E, 3032E and 3038E 

Model 3032E, 3038E
Front tire 25x8.50-14 4PR R4
Rear tire 15.00-19.5 4PR
Wheelbase 60 in. (1525 mm)
Pump capacity 5.3 gpm
Rated pressure 2495 psi
Bucket used Materials
Bucket weight 93 kg (205 lb)
Lift capacity at full height Measured at pivot (U) 1186 lb (539 kg); Measured at 500 mm ahead of pivot (V) 845 lb (384 kg)
Lift capacity at 59 in. (1500 mm) Measured at pivot (W) 1294 lb (588 kg); Measured at 500 mm ahead of pivot (X) 977 lb (444 kg)
Boom breakout force Measured at pivot (Y) 1704 lbf (760 kgf); Measured at 500 mm ahead of pivot (Z) 1204 lbf (537 kgf)
Bucket rollback force capacity At maximum height (VV) 1433 lbf (639 kgf); At 59-in. (1500-mm) lift height (XX) 1814 lbf (809 kgf); At ground-level line (ZZ) 1422 lbf (634 kgf)
Dimensions Maximum lift height (A) 84 in. (2140 mm); At full height - bucket level (B) 78 in. (1979 mm); At full height - bucket dumped (C) 63 in. (1596 mm)
Overall length (I+F), ft (m) 9.5 ft (2.9 m)
Overall height in carry position (J) 5 ft (0.15 m)
Digging depth (H) 5 in. (131 mm)
Reach At maximum height (D) 24 in. (603 mm) At ground level - bucket level (F) 54 in. (1369 mm)
Bucket angle Dump angle, degrees (E) 43.8 degree (angle); Rollback angle, degrees (G) 31.4 degree (angle); Dump angle, ground 122 degree (angle)
Cycle times Loader raise, seconds, 3.31 seconds; Loader lower, seconds, 2.75 seconds; Bucket dump, seconds, 1.75 seconds; Bucket rollback, seconds, 1.88 seconds