John Deere D120
Double tap to zoom
Easily remove and mount loader to and from the tractor without tools
The parking mounting system on the D120 Loader is designed for easy removal and mounting to and from the tractor without tools.
Similar to that of the 305 Loaders, the D120’s parking stands are kept in the torque tube for easy accessibility. To park the loader, simply install parking stands, remove pivot pins from the mast, disconnect the hydraulic hoses, and back out the tractor.
End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points
The unique offset head design eliminates cross-pins and cotter pins to retain the pin.
A nut ensures the pins remain in position.
A lubrication groove provides a path for lubrication.
End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.
|Front tire||18x8.5-10 4PR R4|
|Rear tire||26x12.00-12 4PR R4|
|Wheelbase||1450 mm (57 in.)|
|Pump capacity||3.5 gpm|
|Rated pressure||1987 psi|
|Bucket used||Pin on Materials 1250 mm (49 in.)|
|Bucket weight||51 kg (112 lb)|
|Lift capacity at full height||Measured at pivot (U) 375 kg (825 lb); Measured at 500 mm ahead of pivot (V) 259 kg (570 lb)|
|Lift capacity at 59 in. (1500 mm)||Measured at pivot (W) 429 kg (944 lb); Measured at 500 mm ahead of pivot (X) 309 kg (680 lb)|
|Boom breakout force||Measured at pivot (Y) 806 kg (1808 lb); Measured at 500 mm ahead of pivot (Z) 552 kg (1238 lb)|
|Bucket rollback force capacity||At maximum height (VV) 593 kg (1330 lb); At 59-in. (1500-mm) lift height (XX) 711 kg (1568 lb); At ground-level line (ZZ) 707 kg (1559 lb)|
|Dimensions||Maximum lift height (A) 1809 mm (71.2 in.); At full height - bucket level (B) 1653 mm (65.1 in.); At full height - bucket dumped (C) 1371 mm (54 in.)|
|Overall length (I+F), ft (m)||2.6 m (8.6 ft)|
|Digging depth (H)||-101 mm (-4.0 in.)|
|Reach||At maximum height (D) 571 mm (22.5 in.); At ground level - bucket level (F) 1176 mm (46.3 in.)|
|Bucket angle||Dump angle, degrees (E) -40.1 degree; (angle) Rollback angle, degrees (G) 31.2 degree; (angle)Dump angle, ground, -114.0 degree (angle)|
|Cycle times||Loader raise, seconds, 4.0 seconds; Loader lower, seconds, 2.5 seconds; Bucket dump, seconds, 5.7 (without regen)/2.2 (with regen) seconds; Bucket rollback, seconds, 3.5 seconds|