John Deere 220R
Double tap to zoom
Quik-change attachment carrier
The quik-change attachment carrier allows one person to quickly change attachments without the use of tools. Simply roll the attachment back with the boom slightly off the ground, remove the retaining pins, and then roll the attachment forward and lower to the ground. To connect to another attachment simply align the attachment carrier with the hooks of the attachment, raise the boom for the carrier to engage the hooks of the attachment and rollback the attachment carrier. Then install the retaining pins and the carrier is ready to work.
End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points
The unique offset head design eliminates cross-pins and cotter pins to retain the pin.
A nut ensures the pins remain in position.
A lubrication groove provides a path for lubrication.
End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.
Fits the following models: 2R Series Tractor
|Front tire||23x8.50-14 4PR R4|
|Rear tire||14-17.5 6PR R4|
|Front axle configuration||---|
|Wheelbase||1725 mm (68 in.)|
|Pump capacity||20.2 L/min (5.3 gpm)|
|Rated pressure||17.23 MPa (2499 psi)|
|Leveling configuration||Non-Self Leveling|
|Bucket used||1450 mm (57 in.)|
|Bucket weight||88 kg (194 lb)|
|Lift capacity at full height||Measured at pivot (U) 509 kg (1120 lb); Measured at 500 mm ahead of pivot (V) 365 kg (803 lb)|
|Lift capacity at 59 in. (1500 mm)||Measured at pivot (W) 589 kg (1296 lb); Measured at 500 mm ahead of pivot (X) 445 kg (979 lb)|
|Boom breakout force||Measured at pivot (Y) 886 kgf (1949 lbf); Measured at 500 mm ahead of pivot (Z); 618 kgf (1360 lbf)|
|Bucket rollback force capacity||At maximum height (VV) 1044 kgf (2297 lbf); At 59-in. (1500-mm) lift height (XX) 1302 kgf (2864 lbf); At ground-level line (ZZ) 972 kgf (2138 lbf)|
|Dimensions||Maximum lift height (A) 2160 mm (85 in.); At full height - bucket level(B) 1999 mm (79 in.); At full height - bucket dumped (C) 1667 mm (66 in.)|
|Overall length (I+F), ft (m)||3076 mm (121 in.)|
|Overall height in carry position (J)||---|
|Digging depth (H)||149 mm (6 in.)
|Reach||At maximum height (D) 756 mm (30 in.); At ground level - bucket level (F) 1351 mm (51 in.)|
|Bucket angle||Dump angle, degrees (E) 36 degree (angle); Rollback angle, degrees (G) 34 degree (angle); Dump angle, ground; 115 degree (angle)|
|Cycle times||Loader raise seconds, 3.19 seconds; Loader lower, seconds, 1.94 seconds; Bucket dump, seconds, 4.76 seconds; Bucket rollback, seconds, 2.91 seconds|