Unverferth 400 / NOT AVAILABLE
Features
- Exclusive design not only fills planters and drills, but can be positioned 90 degrees to transfer seed from one container to another
- Model 410XL features features a 21' long conveyor for reaching the tallest planters, spring lift-assist and an exclusive belt design with offset rows of cupped cleats for gently carrying seed at approximately 30 bushels per minute
- Models 400 and 200 feature an 18' long conveyor with cupped and cleated belt
- Available with a 8" belt inside of an 8" tube for up to 12 bushels per minute unloading on model 400 and 200, or a 12" belt inside an 8" tube for unloading up to 25 bushels per minute on model 400
- The conveyor base features rollers that pivot a full 180 degrees and can be locked into position in 3/4" increments which translates to being able to stop every 10" at conveyor spout
- Standard two-stage downspout reaches 34' on the model 410XL and 30' on models 400 and 200 for easily filling planters
- Stainless-steel pivot track for long life and durability
- Downspout features tool-free removal to efficiently use for filling between two other sources
- Easy-opening 5" x 6" doors with rubber funnel regulate seed flow
- Powered by Honda® 11 h.p. (340CC) gas engine with electric start
- Top-mounted, 6-cubic-inch hydraulic motor pulls the belt forward, keeping it tight for the most efficient and gentlest seed movement
- Handle the widest variety of seed including cotton, peanuts and wheat
- Control panel with choke, ignition and throttle controls mounted on conveyor side permits convenient engine operation
- Brush-type seal on conveyor inlet prevents seed from back feeding into the hopper for cleaner operation
- Wired remote for easy on/off and raise/lower operator control and features a magnetic mount and cradle for easily storing on your Seed Pro box carrier
- Hinged latches with easy-to-use locking system for securely fastening boxes
- Easy reach design permits loading of boxes from left or right side on model 200, and rear or either side on model 400
- Large funnel design allows quick, clean unloading. Locking covers are standard for storage ease
- The undercarriage for the Seed Pro bulk box tender features rugged steel construction, rubber-cushioned suspension, tandem with electric brakes, highway-rated tires, lights, reflective striping and and transport chains
- The Seed Pro is also available less undercarriage for mounting on trailers
- Trademarked ivory and tan colors in durable protective coating and silicone sealed seams for long life
Specifications
Model | 400 |
Overall Length (Conv. Forward) | with Bumper Hitch 22'5" |
with Gooseneck Hitch | 23'6" |
Hitch to Rear Bumper Length | 18'9" |
Transport Width | 8'6" |
Transport Height - with boxes | 11'1" |
Transport Height of conveyor | 9'3" |
Underframe Clearance | 1'2" |
Appx. Empty Weight (lbs.) | 5,200 |
Conveyor - Maximum Unloading Height | 12'8" |
Conveyor -Reach at Max Height | 11'3" |
Conveyor -Minimum Unloading Height | 9'3" |
Conveyor - Reach at min. Unloading Height | 13'3" |
Reach with Standard 2-Stage Spout | 30' - (12-Row 30" Planter) |
Reach with Optional 3-Stage Spout | 40' (16-Row 30" Planter) |
Tongue Weight -Loaded (lbs.) | 1,000 |
Hitch Type Std./Opt. | 2-5/16" Ball/3" Pintle |
Lighting Connector | 7-pin flat |
Due to continuing improvements in the design and manufacture of Unverferth products, all specifications contained herein are subject to change without notice. |