Bush Hog 3210
3210 Multi-Spindle Rotary Cutters 3210
Overview:
Cutting Width: 10-feet 6-inches
Cutting Capacity: 3-inches diameter
Min. Trac HP: 50 (P&SM); 60 (L) PTO
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Features
Performance Features
- 3210 Series comes in a Lift, Pull, Semi-Mount & Offset Model
- Rubber Element Cross Shafts
- Heavy Duty Cushioned Axles
- Two Round Blade Holders
- See Specifications Page For Models 3210 & 3210 Offset
Construction Features
- 10-gauge Deck Construction
- 7-gauge Strongbacks
- 1/4-inch Sidebands
- Rubber Cushioned Axle Arms
- 5 Year Gearbox Limited Warranty
- Powder Coat Paint
Product Features
All Bush Hog® Multi-Spindle rotary cutters feature structural steel bracing and reinforced welding at all high stress points. Streamlined deck design inhibits trash and water buildup problems.
Shields over all cross shafts fold conveniently out of the way to allow quick access to clutch or universal joints.
Special rubber-cushioned axle arms reduce shock loads during operation and transport.
A wide angle, constant velocity driveshaft on pull models relieves the PTO working angle. This reduces vibration and allows smoother cutting in sharp turns.
Specifications
| Model | 3210 |
| Cutting Width | 10-feet 6-inches |
| Cutting Capacity | Up to 3-inches |
| Cutting Height | 2 to 13-inches |
| Dimensions (width x Length) | 11-feet 1-inch x 9-feet 10-inches (Lift) |
| Type Hitch | 3-Point Cat. II & III Standard & Quick Hitch Cat. II & III Semi-Mount and Center Pull (Self-Leveling) |
| Deck Thickness | 10-gauge |
| Side Bands | 1/4-inch x 10-inches |
| Minimum Tractor HP | 50 PTO (Pull); 60 PTO (Lift) |
| Driveline | ASAE Category 5 (540 RPM - Lift, Pull & Semi-Mount); ASAE Cat. 4 (1,000 RPM Pull) |
| Cross Shaft | ASAE Cat. 5 Rubber Element |
| Gearbox HP | (3) 210 Center and 205 Outboard |
| Tractor PTO Speed | 540/1,000 RPM |
| Driveline Protection | 4 Plate PTO Slip Clutch |
| Height Adjustment | Manual or Hydraulic |
| Blade Holder(s) | Round |
| Blades | 1/2-inch x 4-inches - Uplift |
| Blade Tip Speed | 16,881 FPM/540 RPM; 17,400/1,000 RPM |
| Blade Overlap | 3-inches |
| Tires | Laminated, Airplane (Pull Only) |
| Axles | Rubber Cushioned; Choice of Single or Dual Axle for Pull Models |
| Deflectors | Selection: Front Chains and Rear Bands or Chains |
| Safety Tow Chain | Standard for Pull Models |
| Approximate Weight | (Pull with Single Axle) 2,741-lbs. |