Bush Hog 5110
Features
PERFORMANCE FEATURES
- New and improved axle suspension reduces g-force shock loads by 51%
- Replaceable 1/2″ Cast Wing Skids for extended wear during heavy ground contact
- Angled rear deck section with 41% longer skids improve durability during side and backward impacts
- New durable Cast Leveling Rod Cams make adjusting deck pitch easier
- New Cast Walking Tandem Axles walk over the most rugged terrain instead of bounce through it
- Center section axle spindles are centered on the axle arm for equalized loading of vertical forces
- Grease fittings and spring steel bushings at axle pivot points for longer life.
- Wing decks free float 22° down and 45° up without engaging the hydraulic cylinder for longer cylinder life
- Wing axles are adjustable 20″ left to right for variable row crop spacings
- New Rollover and Clevis Stops on the Perma-Level+ Hitch make tractor hookups easier
- Increased Cutting and Transport Height by 2″ to mow down taller vegetation and easier loading on trailers
SAFETY FEATURES
- Double Row Chains to knock down flying debris
- New Cast Transport Lock supports the cutter while transporting
- Wing locks hold the wings stable when in an upright position
- Rollover and Clevis Stops reduce rotating and swinging hitch components while attaching to tractor drawbar/li>
- 360° coverage around rotating drivelines
CONSTRUCTION FEATURES
- Industry first — 3″ O.D. output shaft in cutting gearboxes
- Smooth-top 1/4″ deck plates are heavily-reinforced for years of trouble-free service
- 33% stronger gearbox mount and stand are built to withstand years of punishing mowing conditions
- 3/4″ blade carriers come standard with 5″ blades and hardened hex-head blade bolts and bushings for more powerful shredding and easy blade changes
- 194% increase in axle arm section for substantially improved strength
- ASAE Cat. 6 Input Drivelines and ASAE Cat. 5 Wing Drivelines for use in extreme cutting conditions
- Patented oil sight windows make for quick and easy oil level checks
- Grease fittings in our E-Z lube drivelines align for reduced service times
Specifications
| MODELS | 5110 |
| CUTTING WIDTH | 10'6″ |
| CUTTING HEIGHT | 1 1/2″ - 16″ |
| CUTTING CAPACITY | 5″ |
| TRANSPORT WIDTH* | 8′ 2″ |
| TRANSPORT HEIGHT** | 7′ 3″ |
| TRANSPORT LENGTH*** | 15′ 3″ |
| APPROXIMATE WEIGHT (LB.) | 6,300 |
| APPROXIMATE TONGUE WEIGHT (LB.) | 2,200 |
| MINIMUM TRACTOR PTO HP | 70 |
| HITCH | "PERMA-LEVEL+" OR 2-5/16″ BALL HITCH |
| CENTER DECK | 1/4″ |
| WING DECK | 1/4″ |
| WING CUTTING ANGLES | 22° DOWN AND 45° UP |
| WING LEVEL ADJUSTMENT | TURNBUCKLES |
| SIDEBANDS | 1/4″ X 13 1/2″ |
| TRANSFER GEARBOX (HP) | 250 |
| CUTTING GEARBOXES (HP) | 225 |
| INPUT DRIVELINE | CATEGORY 6 |
| WING DRIVELINES | CATEGORY 5 |
| BLADE HOLDER | 3/4″ UPLIFT |
| BLADES | 1/2″ X 5″ |
| BLADE TIP SPEED (FPM) | 16,268 |
| AXLE SUSPENSION | ISOLATORS @ EACH AXLE + CENTER ISOLATOR BANK |
| CENTER & WING HYDRAULICS | 2 HOSES STANDARD |
| SAFETY TOW CHAIN | STANDARD |
| DISTRIBUTION BAFFLES | OPTIONAL |
| PTO DRIVELINE SUPPORT | OPTIONAL |






















