John Deere FM3012

Double tap to zoom



  • Anti-scalping rollers provide a uniform cut
  • Gearbox comes with three-year warranty
  • Light bar for FM30 Series Flex-Wing Grooming Mower
  • Tubular caster arm supports prolong life of mower


Manufacturer John Deere
Model FM3012
Cutting width  
Total, ft, in. (m) 3.8 m
  12.5 ft
Center deck, ft, in. (m) 1.4 m
  4.5 ft
Wing deck, ft, in. (m) 1.4 m
  4.5 ft
Transport width, ft, in. (m) 2.4 m
  7.75 ft
Overall width, ft, in. (m) 3.8 m
  12.583 ft
Transport length, ft, in. (m) 3.2 m
  10.5 ft
Max overall length, ft, in. (m) 3.4 m
  11.25 ft
Transport height, ft, in. (m) 1.8 m
  5.875 ft
Operating, lb. (kg) 923.1 kg
  2035 lb
Shipping, lb. (kg) 950.3 kg
  2095 lb
Operating tongue, lb. (kg) 90.7 kg
  200 lb
Transport tongue, lb. (kg) 199.6 kg
  440 lb
Tractor requirements  
Power, hp (kW) 18.6-44.7 kW
  25-60 hp
PTO speed rpm 540 rpm
Ratio 1-to-1.92
Splitter gearbox hp (kW) 74.6 kW
  100 hp
Mower deck gearbox hp (kW) 26.1 kW
  35 hp
Type Gearbox over V-belt
Wing driveline Category 3
Input driveline Category 3 CV
Drawbar Category 1
Clevis Floating
Adjustment Self-leveling, multi-position
Thickness, gauge 10 gauge
  3.416 mm
  0.1345 in.
Overlap, in. (cm) 15.2 cm
  6 in.
Lift cylinders, in. (cm) 7.6x25.4 cm
  3x10 in.
Wing travel, degrees Up 20 degree (angle)
  and down 15 degree (angle)
Discharge type Rear
Cutting height  
Range, in. (cm) 2.5-11.4 cm
  1-4.5 in.
Adjustment Spacer on caster
Average tip speed, fpm (meter per minute) 5486 m/min
  18,000 fpm
Spindle quantity Nine
Spindle type Cast iron
Spindle bearings Greasable ball
Overflap, in. (cm) 3.8 cm
  1.5 in.
Dimensions, type 1, in. (cm) 0.6x6.4 cm
  0.25x2.5 in.
Dimensions, type 2, in. (cm) ---
Composition Heat-treated alloy steel
Transport (2) 20X8-10
Caster wheels  
Quantity 10
Type Solid
Size, in. (cm) 25.4x10.2 cm
  10x4 in.
Bearings Powder metal bushing
Front Standard
Ground pressure  
Pounds per square inch (kg per square centimeter) 5
Type B section, Kevlar
Adjustment Spring-loaded idler
Mainframe Wall tubing: 0.34 cm
  0.25 in.
Lighting and safety  
Transport lights Standard
Rear chain shields Standard
Auto-engage transport latch Standard
Markings Slow-moving vehicle
Set-up time  
Labor hours 1.25
Machine 1 year
Gearbox 1 year