John Deere WR3010

Double tap to zoom



The raking width on the Frontier WR30 Series Carted Rakes can be adjusted to three different positions with the pin and fine-tuned with the turnbuckle screw.

Adjusting the fine-tune spring on the WR30 Series allows proper wheel down pressure.

A single cylinder with a linkage system allows easy raising and lowering of the rake wings.

  • Rake width adjustment
  • Down pressure spring adjustment
  • Hydraulic hose field conversion kit
  • Center kicker wheel conversion kit


Manufacturer John Deere
Model WR3010
Transport width 2.89 m (9.5 ft)
Transport length 4.72 m (15. 5 ft)
Frame clearance 60.96 cm (24 in.)
Raking width ---
Minimum 5.48 m (18 ft)
Maximum 6.7 m (22 ft)
Windrow width ---
Minimum 121.92 cm (48 in)
Maximum 182.88 cm (72 in)
Transport height ---
Implement 578 kg (1275 lb)
Shipping ---
Rake wheel 
Quantity 10
Diameter 139.7 cm (55 in.)
Hubs Tapered roller bearings
Teeth per wheel 40
Teeth diameter 0.7 cm (0.276 in.)
Flex up Limited
Flex down Limited
Tractor compatibility 
Horsepower requirements 22.4 kW (30 hp)
SCV ---
Type Single acting remote for raising wing (double acting remote for optional 2nd hose kit)
Quantity One
Electrical requirement ---
Minimum tractor size ---
Transport ---
Size ST175/80D13
Quantity Two
Gauge ---
Size ---
Quantity ---
Lights ---
Marking SMV
Hitch jack Standard
Safety chain Standard
Set-up time 
Labor hours 3
Time period 1 year
Date collected