John Deere WR2110

Double tap to zoom



A two-wheel extension kit (optional) is available to adapt the WR2110 (10-wheel version) into a 12-wheel version.

Fine-tune the WR20 Series rake wheel ground pressure with a few turns of the hand cranks. There is one crank on each beam to adjust.

The windrow width is changed by adjusting the angle of the last raking wheel on each side of the WR20 Series.

Adjustments are easily done with the hand cranks. Choose any width from a narrow 48 in. to a wide 72 in.

The WR21 Series Wheel Rake's two center kicker wheels can be ordered as an option with the wheel rake at the time of ordering, or it can be ordered later as an aftermarket attachment. Either way, two center kicker wheels are provided.

The center kicker wheels turn the center of the windrow by half a turn for a fluffier, more even windrow.  They also increase dry-down and prevent the need to run the baler pickup too close to the ground.

The WR20 Series Economy Wheel Rake wheels are independently spring loaded to follow ground contours while minimizing disturbance.

  • Spring-loaded rake wheels
  • Easily adjusted windrow widths
  • Center kick wheels conversion kit
  • Adjustable rake wheel ground pressure


Manufacturer John Deere
Model WR2110
Transport width 2.7 m (9 ft)
Transport length 7.3 m (24 ft)
Frame clearance 105 cm (41.25 in.)
Raking width ---
Minimum 5.4 m (17.67 ft)
Maximum 5.9 m (19.5 ft)
Windrow width ---
Minimum 120 cm (48 in.)
Maximum 180 cm (72 in.)
Transport height ---
Implement 940 kg (2072 lb)
Shipping 940 kg (2072 lb)
Rake wheel 
Quantity 10
Diameter 139.7 cm (55 in.)
Hubs Sealed ball bearing
Teeth per wheel 40
Teeth diameter 0.70 cm (0.28 in.)
Flex up ---
Flex down ---
Tractor compatibility 
Horsepower requirements 22 kW (30hp)
SCV ---
Type ---
Quantity Two
Electrical requirement ---
Minimum tractor size ---
Transport ---
Size 185/65-14
Quantity Four
Gauge ---
Size ---
Quantity ---
Lights None
Marking SMV
Hitch jack Standard
Safety chain Standard
Set-up time 
Labor hours 8
Time period 1 year