John Deere 4052R

Double tap to zoom



  • Turbocharged diesel engine
  • PowrReverser™ or eHydrostatic Transmission Options
  • Cab or Open Station configurations
  • Premium features: Hitch Assist, Aux Hitch Control, HST controls


Manufacturer John Deere
Model 4052R HST/PRT (2017)
Family  EYDXL2.09TDA  
Manufacturer  Yanmar  
Engine model  4TNV86CT-MJT  
Engine power (gross)  37.9 kW 
   50.8 hp 
   PS at 2600 rpm 
   SAE J1995 rated power  
Power take-off (PTO) power  31.4 kW 
   42.2 hp 
   Per SAE J1995  
Rated engine speed  2600 rpm 
Type  Diesel  
Injection pump type  High pressure common rail direct injection  
Aspiration  Turbocharged  
Emissions compliance  Final Tier 4  
Cylinders/displacement  4 / 2.091 L 
   4 / 127.6 cu in. 
Number of cylinders  Four  
Cylinder liners  Cast-in-block  
Bore and stroke  86 x 90 mm 
   3.4 x 3.54 in. 
Compression ratio  19.1:1  
Lubrication  Pressurized  
Cooling system  Liquid  
Air cleaner  Dual element with electronic restriction indicator  
Engine torque at rated speed  139 Nm 
   102.5 lb-ft 
Fuel tank capacity  Rollover protective structure (ROPS) - 49.2 L 
   13 U.S. gal. 
   Cab - 52.2 L 
   13.8 U.S. gal. 
Battery size  770 CCA 
Alternator (12-V)  75 amp 
Starter size  2 kW 
   2.68 hp 
Fuel system  
Type  High pressure common rail direct injection  
Fuel consumption  ---  
*Fuel consumption rate should be used for comparison purposes only  ---  
Standard transmission; forward/reverse  12/12 PowrReverser transmission (PRT)  
Optional transmission; forward/reverse  3/3 Hydrostatic transmission (HST)  
Left-hand reverser  Yes  
Transmission gear ranges  ---  
Final drive  Planetary  
Brakes  Multi-plate wet disc  
Steering  Hydrostatic power steering  
Clutch, wet/dry  Wet  
Clutch disk diameter wet clutch  129 mm 
   5.08 in. 
Axle capacity  Mechanical front-wheel drive (MFWD) - 1.6 kg 
   5.9 lb 
Front  1600 kg 
   3528 lb 
Rear  2400 kg 
   5292 lb 
Creeper  Standard - 4R  
Cruise control  Standard  
Differential lock  Yes  
Drawbar maximum vertical load    
Type  Open center  
Pump rated output  60.2 L/min 
   15.9 gpm 
Steering  ---  
Implement  ---  
Pump type  Dual gear  
Maximum operating pressure  ---  
Draft control sensing  Position control  
Remote control valves available  Up to five rear remotes  
3-point hitch  
Category  Category 1  
Lift capacity, 24-in. behind link arms  1135 kg 
   2500 lb 
Power take-off (PTO)  
Standard  Rear - 540 rpm at 2600 rpm 
Optional  540 rpm 
   540E rpm 
Control  Independent  
Clutch  Wet disc  
Brake (for mid and rear PTO)  ---  
Engagement method  Electro-hydraulic  
Fluid capacities  
Crankcase with filter  5.3 L 
   1.4 qt 
Transmission and hydraulic system  44 L 
   12 gal. 
Final drive  
Type  Planetary  
Differential lock  Yes  
Operator station  
Rollover protective structure  Yes  
Type  Foldable  
Platform - flat/straddle  Flat  
Gear shift location - console/floor  Left-hand side  
Compliance  OSHA, SAE, ASAE  
Visibility  360 degree (angle) 
Air conditioning, temperature differential  16.7 °C 
   30 °F 
Doors  One  
Noise rating  78 dBA 
Seat equipment  Air  
Wheelbase  185.4 cm 
   73 in. 
Front axle clearance  39.6 cm 
   15.6 in. 
Turning radius with brakes  2.8 m 
   9.19 ft 
Turning radius without brakes  3.0 m 
   9.84 ft 
Limited slip differential  ---  
Approximate shipping weight (open-station; cab)  Open operator station (OOS) - 1710 kg 
   3770 lb 
   Cab - 2120 kg 
   4675 lb 
Front  Farm - 8-16  
   Turf - 27x10.5-15  
   R4 - 10-16.5  
Rear  Farm - 14.9-24  
   Turf - 44x18-20 or 22.5LL-16.1  
   R4 - 17.5Lx24  
Front tread range  148.1 cm 
   58.3 in. 
Rear tread spacing  137.2 cm 
   54 in. 
Toolbox  ---  
Tilt steering wheel  ---  
12-V Outlet  ---  
Date collected  ---