John Deere 4052M

Features
- Turbocharged diesel engine
- PowrReverser™ or eHydrostatic Transmission options
- Standard 4-wheel-drive
- Category 1, 3-point hitch compatible with iMatch™ Quick-Hitch
Specifications
Manufacturer | John Deere |
Model | 4052M HST/PRT (2017) |
Engine | |
Family | EYDXL2.09TDA |
FYDXL2.09TDA | |
GYDXL2.09TDA | |
Manufacturer | Yanmar |
Engine model | 4TNV86CT-MJT |
Engine power (gross) | 37.9 kW |
51.5 hp | |
PS at 2600 rpm | |
SAE J1995 rated power | |
Power take-off (PTO) power | 29.8 kW |
39.9 hp | |
Per SAE J1995 | |
Rated engine speed | 2600 rpm |
Type | Diesel |
Injection pump type | High pressure common rail direct injection |
Aspiration | Turbocharged |
Emissions compliance | Final Tier 4 |
Cylinders/displacement | 4 / 2.091 L |
4 / 127.6 cu in. | |
Number of cylinders | Four |
Cylinder liners | Cast-in-block |
Bore and stroke | 86 x 90 mm |
3.4 x 3.54 in. | |
Compression ratio | 19.1:1 |
Lubrication | Pressurized |
Cooling system | Liquid |
Air cleaner | Dual element |
Engine torque at rated speed | 139 Nm |
102.5 lb-ft | |
Fuel tank capacity | 49.2 L |
13 U.S. gal. | |
Electrical | |
Battery size | 770 CCA |
Alternator (12-V) | 75 amp |
Starter size | 2 kW |
2.68 hp | |
Fuel system | |
Type | High pressure common rail direct injection |
Fuel consumption | --- |
*Fuel consumption rate should be used for comparison purposes only | --- |
Transmission | |
Standard transmission; forward/reverse | 12/12 PowrReverser transmission (PRT) |
Optional transmission; forward/reverse | 3/3 Hydrostatic transmission (HRT) |
Left-hand reverser | Yes |
Transmission gear ranges | --- |
Final drive | Planetary |
Brakes | Multi-plate wet disc |
Steering | Hydrostatic power steering |
Clutch, wet/dry | Wet |
Clutch disk diameter wet clutch | 129 mm |
5.08 in. | |
Axle capacity | Mechanical front-wheel drive (MFWD) - 1.6 kg |
5.9 lb | |
Front | 1600 kg |
3528 lb | |
Rear | 2400 kg |
5292 lb | |
Creeper | --- |
Cruise control | Optional |
Differential lock | Yes |
Drawbar maximum vertical load | |
Hydraulics | |
Type | Open center |
Pump rated output | 60.2 L/min |
15.9 gpm | |
Steering | --- |
Implement | --- |
Pump type | Dual gear |
Maximum operating pressure | --- |
Draft control sensing | Position control |
Remote control valves available | Up to three rear remotes |
3-point hitch | |
Category | Category 1 |
Lift capacity, 24-in. behind link arms | 1135 kg |
2500 lb | |
Power take-off (PTO) | |
Standard | Rear - 540 rpm at 2600 rpm |
Optional | --- |
Control | Position |
Clutch | Wet disc |
Brake (for mid and rear PTO) | --- |
Engagement method | --- |
Fluid capacities | |
Crankcase with filter | 5.3 L |
1.4 qt | |
Transmission and hydraulic system | 44 L |
12 gal. | |
Final drive | |
Type | Planetary |
Differential lock | Yes |
Operator station | |
Rollover protective structure | Yes |
Type | Foldable |
Platform - flat/straddle | Flat |
Gear shift location - console/floor | Left-hand side |
Cab | |
Compliance | --- |
Visibility | --- |
Air conditioning, temperature differential | --- |
Doors | --- |
Noise rating | --- |
Seat equipment | --- |
Dimensions | |
Wheelbase | 185.4 cm |
73 in. | |
Front axle clearance | 395 mm |
15.6 in. | |
Turning radius with brakes | 2.8 m |
9.19 ft | |
Turning radius without brakes | 3 m |
9.84 ft | |
Limited slip differential | --- |
Approximate shipping weight (open-station; cab) | OOS - 1710 kg |
3770 lb | |
Cab - 2120 kg | |
4675 lb | |
Tires | |
Front | Farm - 8-16 |
Turf - 27x10.5-15 | |
R4 - 10-16.5 | |
Rear | Farm - 14.9-24 |
Turf - 44x18-20 or 22.5LL-16.1 | |
R4 - 17.5Lx24 | |
Front tread range | 148.1 cm |
58.3 in. | |
Rear tread spacing | 137.2 cm |
54 in. | |
Miscellaneous | |
Toolbox | --- |
Tilt steering wheel | --- |
12-V Outlet | --- |
Date collected | --- |