John Deere 3038E

Double tap to zoom



  • Standard four-wheel drive(4WD) for maximum traction
  • Hydro transmission with Twin Touch™ pedals for ease of use
  • On-board diagnostics including Service Advisor
  • Category 1 3-pt hitch compatible with dozens of implements


Manufacturer John Deere
Model 3038E (2017)
Family  FYDXL1.57TDA  
Manufacturer  Yanmar  
Engine model  3TNV86CT-NJT  
Engine power (gross)  27.4 kW 
   37.3 hp 
Power take-off (PTO) power  22.4 kW 
   30 hp 
Rated engine speed  2500 rpm 
Type  Diesel  
Injection pump type  High pressure common rail direct injection  
Aspiration  Turbocharged  
Emissions compliance  Final Tier 4  
Cylinders/displacement  3 / 1.57 L 
   3 / 95.7 cu in. 
Number of cylinders  Three  
Cylinder liners  Cast-in-block  
Bore and stroke  86 x 90 m 
   3.4 x 3.54 in. 
Compression ratio  19.1:1  
Lubrication  Pressurized  
Cooling system  Water Pump  
Air cleaner  Dual element  
Engine torque at rated speed  105 Nm 
   77.4 lb-ft 
Fuel tank capacity  23.5 L 
   6.2 gal. 
Battery size  500 CCA 
Alternator (12-V)  75 amp 
Starter size  1.4 kW 
   1.9 hp 
Fuel system  
Type  High pressure common rail direct injection  
Fuel consumption  ---  
*Fuel consumption rate should be used for comparison purposes only  ---  
Standard transmission; forward/reverse  Hydrostatic transmission (HST)  
Optional transmission; forward/reverse  ---  
Left-hand reverser  No  
Transmission gear ranges  ---  
Final drive  Bull Gear  
Brakes  Wet disc  
Steering  Power steering  
Clutch, wet/dry  ---  
Clutch disk diameter wet clutch  ---  
Axle capacity  ---  
Front  798 kg 
   1760 lb 
Rear  1197 kg 
   2460 lb 
Creeper  ---  
Cruise control  Optional  
Differential lock  Yes  
Drawbar maximum vertical load    
Type  Open center  
Pump rated output  35.2 L/min 
   9.3 gpm 
Steering  15.0 L/min 
   4.0 gpm 
Implement  20.2 L/min 
   5.3 gpm 
Pump type  Dual gear  
Maximum operating pressure  172.4 bar 
   2500 psi 
Draft control sensing  Position control  
Remote control valves available  Up to two (optional)  
3-point hitch  
Category  Category 1  
Lift capacity, 24-in. behind link arms  615.1 kg 
   1356 lb 
Power take-off (PTO)  
Standard  Rear - 540 rpm 
Optional  ---  
Control  Independent  
Clutch  Multi disc, wet  
Brake (for mid and rear PTO)  Multiple wet disc  
Engagement method  ---  
Fluid capacities  
Crankcase with filter  4.5 L 
   4.8 qt 
Transmission and hydraulic system  21.0 L 
   5.5 U.S. gal. 
Final drive  
Type  Bull Gear  
Differential lock  Yes  
Operator station  
Rollover protective structure  ASAE S478  
Type  Rigid  
Platform - flat/straddle  Semi-flat  
Gear shift location - console/floor  Left-hand side  
Compliance  ---  
Visibility  ---  
Air conditioning, temperature differential  ---  
Doors  ---  
Noise rating  ---  
Seat equipment  ---  
Wheelbase  152.4 cm 
   60 in. 
Front axle clearance  33 cm 
   13 in. 
Turning radius with brakes  2.8 m 
   9.2 ft 
Turning radius without brakes  ---  
Limited slip differential  ---  
Approximate shipping weight (open-station; cab)  1007.9 kg 
   2222 lb 
Front  Farm - 7-14  
   Turf - 27x8.5-15  
   R4 - 25x8.5-14  
Rear  Farm - 11.2-24  
   Turf - 41x14-20  
   R4 - 15-19.5  
Front tread range  ---  
Rear tread spacing  ---  
Toolbox  ---  
Tilt steering wheel  ---  
12-V Outlet  ---  
Date collected  ---