John Deere 3032E

Features
- Standard four-wheel drive(4WD) for maximum traction
- Hydro transmission with Twin Touch™ pedals for ease of use
- Horizontal exhaust and folding ROPS – new for 2015 Model Year machines
- Category 1 3-pt hitch compatible with dozens of implements
Specifications
Manufacturer | John Deere |
Model | 3032E (2017) |
Engine | |
Family | EYDXL1.64NDA |
FYDXL1.64NDA | |
GYDXL1.64NDA | |
Manufacturer | Yanmar |
Engine model | 3TNV88C-NJT |
Engine power (gross) | 22.9 kW |
31.1 hp | |
Power take-off (PTO) power | 18.6 kW |
25 hp | |
Rated engine speed | 2500 rpm |
Type | --- |
Injection pump type | High pressure common rail direct injection |
Aspiration | Natural |
Emissions compliance | Final Tier 4 |
Cylinders/displacement | 3 / 1.64 L |
3 / 100.2 cu in. | |
Number of cylinders | Three |
Cylinder liners | Cast-in-block |
Bore and stroke | 88 x 90 mm |
3.46 x 3.54 in. | |
Compression ratio | 19.1:1 |
Lubrication | Pressurized |
Cooling system | Water pump |
Air cleaner | Dual element |
Engine torque at rated speed | 87 Nm |
64.2 lb-ft | |
Fuel tank capacity | 23.5 L |
6.2 U.S. gal. | |
Electrical | |
Battery size | 500 CCA |
Alternator (12-V) | 75 amp |
Starter size | 1.4 kW |
1.9 hp | |
Fuel system | |
Type | High pressure common rail direct injection |
Fuel consumption | --- |
*Fuel consumption rate should be used for comparison purposes only | --- |
Transmission | |
Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
Optional transmission; forward/reverse | --- |
Left-hand reverser | --- |
Transmission gear ranges | --- |
Final drive | Bull Gear |
Brakes | Wet disc |
Steering | Power steering |
Clutch, wet/dry | --- |
Clutch disk diameter wet clutch | --- |
Axle capacity | --- |
Front | 798 kg |
1760 lb | |
Rear | 1197 kg |
2640 lb | |
Creeper | No |
Cruise control | Optional |
Differential lock | Yes |
Drawbar maximum vertical load | |
Hydraulics | |
Type | Open center |
Pump rated output | 35.2 L/min |
9.3 gpm | |
Steering | 15 L/min |
4 gpm | |
Implement | 20.2 L/min |
5.3 gpm | |
Pump type | Dual gear |
Maximum operating pressure | 172.4 bar |
2500 psi | |
Draft control sensing | Position control |
Remote control valves available | Up to two (optional) |
3-point hitch | |
Category | Category 1 |
Lift capacity, 24-in. behind link arms | 615.1 kg |
1356 lb | |
Power take-off (PTO) | |
Standard | 540 rpm at 2500 rpm |
Optional | --- |
Control | Independent |
Clutch | Independent |
Brake (for mid and rear PTO) | Wet disc |
Engagement method | --- |
Fluid capacities | |
Crankcase with filter | 4.5 L |
4.8 qt | |
Transmission and hydraulic system | --- |
Final drive | |
Type | Bull Gear |
Differential lock | --- |
Operator station | |
Rollover protective structure | ASABE S478 |
Type | Foldable |
Platform - flat/straddle | Semi-flat |
Gear shift location - console/floor | Left-hand side |
Cab | |
Compliance | --- |
Visibility | --- |
Air conditioning, temperature differential | --- |
Doors | --- |
Noise rating | --- |
Seat equipment | --- |
Dimensions | |
Wheelbase | 152.4 cm |
60 in. | |
Front axle clearance | 33 cm |
13 in. | |
Turning radius with brakes | 2.8 m |
9.2 ft | |
Turning radius without brakes | --- |
Limited slip differential | --- |
Approximate shipping weight (open-station; cab) | 1007.9 kg |
2222 lb | |
Tires | |
Front | Farm - 7-14 |
Turf - 27x8.5-15 | |
R4 - 25x8.5-14 | |
Rear | Farm - 11.2-24 |
Turf - 41x14-20 | |
R4 - 15-19.5 | |
Front tread range | --- |
Rear tread spacing | --- |
Miscellaneous | |
Toolbox | --- |
Tilt steering wheel | --- |
12-V Outlet | --- |
Date collected | --- |