John Deere 2038R

Features
- Powerful and fuel-efficient Tier IV Yanmar engine
- AutoConnect™ Drive-over Mower Decks up to 72 inches
- New model is on larger, heaver frame for added stability
- Standard cruise control, 12-V outlet and premium seating
Specifications
Manufacturer | John Deere |
Model | 2038R (2017) |
Engine | |
Family | GYDXL1.57TDA |
Manufacturer | Yanmar |
Engine model | 3TNV88C-NJT |
Engine power (gross) | 27.4 kW |
37.3 hp | |
SAE J1995 rated power | |
Power take-off (PTO) power | 22.7 kW |
30.4 hp | |
Rated engine speed | 2500 rpm |
Type | Direct Injection |
Injection pump type | Direct Injection |
Aspiration | Turbocharged |
Emissions compliance | Final Tier 4 |
Cylinders/displacement | 3 / 1.568 L |
3 / 95.8 cu in. | |
Number of cylinders | Three |
Cylinder liners | Cast-in-block |
Bore and stroke | 86x90 mm |
3.39x3.54 in. | |
Compression ratio | 19.1:1 |
Lubrication | Pressurized |
Cooling system | Water pump |
Air cleaner | Dual element |
Engine torque at rated speed | 101.4 Nm |
74.8 lb-ft | |
Fuel tank capacity | 32 L |
8.5 U.S. gal. | |
Electrical | |
Battery size | 500 CCA |
Alternator (12-V) | 85 amp |
Starter size | 1.4 kW |
1.9 hp | |
Fuel system | |
Type | Direct Injection |
Fuel consumption | --- |
*Fuel consumption rate should be used for comparison purposes only | --- |
Transmission | |
Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
Optional transmission; forward/reverse | --- |
Left-hand reverser | --- |
Transmission gear ranges | --- |
Final drive | Bull Gear |
Brakes | Wet disc |
Steering | Power steering |
Clutch, wet/dry | --- |
Clutch disk diameter wet clutch | --- |
Axle capacity | --- |
Front | 880 kg |
1940 lb | |
Rear | 1089 kg |
2400 lb | |
Creeper | No |
Cruise control | Standard |
Differential lock | Yes |
Drawbar maximum vertical load | |
Hydraulics | |
Type | Open center |
Pump rated output | 35.2 L/min |
9.3 gpm | |
Steering | 15 L/min |
4 gpm | |
Implement | 20.2 L/min |
5.3 gpm | |
Pump type | Gear |
Maximum operating pressure | 172.37 bar |
2500 psi | |
Draft control sensing | Position control |
Remote control valves available | Up to three |
3-point hitch | |
Category | Category 1 |
Lift capacity, 24-in. behind link arms | 615 kg |
1356 lb | |
Power take-off (PTO) | |
Standard | Rear - 540 rpm |
Mid - 2000 rpm | |
Optional | --- |
Control | Independent |
Clutch | Independent |
Brake (for mid and rear PTO) | Wet disc |
Engagement method | --- |
Fluid capacities | |
Crankcase with filter | 4.5 L |
4.8 qt | |
Transmission and hydraulic system | --- |
Final drive | |
Type | Spur Gear |
Differential lock | Yes |
Operator station | |
Rollover protective structure | ASABE S478 |
Type | Foldable |
Platform - flat/straddle | Flat |
Gear shift location - console/floor | Left-hand side |
Cab | |
Compliance | --- |
Visibility | --- |
Air conditioning, temperature differential | --- |
Doors | --- |
Noise rating | --- |
Seat equipment | --- |
Dimensions | |
Wheelbase | 172.5 cm |
67.9 in. | |
Front axle clearance | --- |
Turning radius with brakes | 2.75 m |
9.02 ft | |
Turning radius without brakes | 3 m |
9.84 ft | |
Limited slip differential | --- |
Approximate shipping weight (open-station; cab) | 1105 kg |
2436 lb | |
Tires | |
Front | R1 Ag 7.00-12 |
R3 Turf 23x8.50-14 | |
R4 Industrial 23x8.50-14 | |
R3 Turf Radial 200/60 R15 | |
Rear | R1 Ag 12.4-16 |
R3 Turf 14-17.5 | |
R4 Industrial 14-17.5 | |
R3 Turf Radial 300/70 R20 | |
Front tread range | --- |
Rear tread spacing | --- |
Miscellaneous | |
Toolbox | Yes |
Tilt steering wheel | Yes |
12-V Outlet | Yes |
Date collected | --- |