John Deere 1025R

Features
- Powerful Tier 4-compliant diesel engine
- New, easy-lift hood with dual gas-charged lift struts
- Premium Operator Station with ergonomic seat, armrests and fender lights
- Auto-Connect™ mid-mower deck can be installed or removed in less than 5 minutes
Specifications
Manufacturer | John Deere |
Model | 1025R (2017) |
Engine | |
Family | EYDXL1.27NS1 |
FYDXL1.27NS1 | |
GYDXL1.27NS1 | |
Manufacturer | Yanmar |
Engine model | 3TNV80F-NCJT |
Engine power (gross) | 17.8 kW |
23.9 hp | |
24.2 PS | |
SAE J1995 rated power | |
Power take-off (PTO) power | 13.4 kW |
18 hp | |
Rated engine speed | 3200 rpm |
Type | Diesel |
Injection pump type | Indirect Injection |
Aspiration | Natural |
Emissions compliance | Final Tier 4 |
Cylinders/displacement | 3 / 1.267 L |
3 / 77.3 cu in. | |
Number of cylinders | Three |
Cylinder liners | Cast-in-block |
Bore and stroke | 80x84 mm |
3.15x3.31 in. | |
Compression ratio | 23.0:1 |
Lubrication | Pressurized |
Cooling system | Water pump |
Air cleaner | Dual element with mechanical restriction indicator |
Engine torque at rated speed | 55.2 Nm |
40.7 lb-ft | |
Fuel tank capacity | 21.2 L |
5.6 U.S. gal. | |
Electrical | |
Battery size | 500 CCA |
Alternator (12-V) | 40 amp |
Starter size | 1.2 kW |
1.6 hp | |
Fuel system | |
Type | Indirect Injection |
Fuel consumption | 5.8 L/hr |
1.5 U.S. gal./hr | |
*Fuel consumption rate should be used for comparison purposes only | --- |
Transmission | |
Standard transmission; forward/reverse | Hydrostatic - 2 range |
Optional transmission; forward/reverse | --- |
Left-hand reverser | No |
Transmission gear ranges | --- |
Final drive | Bull Gear |
Brakes | Wet disc (left-hand pedal) |
Steering | Power |
Clutch, wet/dry | N/A |
Clutch disk diameter wet clutch | --- |
Axle capacity | --- |
Front | 612 kg |
1349 lb | |
Rear | 715 kg |
1576 lb | |
Creeper | No |
Cruise control | Standard |
Differential lock | Yes |
Drawbar maximum vertical load | |
Hydraulics | |
Type | Open center |
Pump rated output | 24 L/min |
6.3 gpm | |
Steering | 10.8 L/min |
2.8 gpm | |
Implement | 13.2 L/min |
3.5 gpm | |
Pump type | Gear |
Maximum operating pressure | 137.9 bar |
2000 psi | |
Draft control sensing | Position control |
Remote control valves available | Two |
3-point hitch | |
Category | Limited Category 1 |
Lift capacity, 24-in. behind link arms | 309 kg |
681 lb | |
Power take-off (PTO) | |
Standard | Rear - 540 rpm |
Mid - 2100 rpm | |
Optional | --- |
Control | Independent |
Clutch | Wet disc |
Brake (for mid and rear PTO) | Wet disc |
Engagement method | --- |
Fluid capacities | |
Crankcase with filter | 2.7 L |
2.9 qt | |
Transmission and hydraulic system | 3.7 gal. |
14 L | |
Final drive | |
Type | Bull Gear |
Differential lock | Yes |
Operator station | |
Rollover protective structure | Yes |
Type | Foldable |
Platform - flat/straddle | One-piece semi flat |
Gear shift location - console/floor | Left-hand side |
Cab | |
Compliance | NA |
Visibility | NA |
Air conditioning, temperature differential | NA |
Doors | NA |
Noise rating | NA |
Seat equipment | NA |
Dimensions | |
Wheelbase | 145 cm |
57.1 in. | |
Front axle clearance | 195 mm |
7.7 in. | |
Turning radius with brakes | --- |
Turning radius without brakes | 2.25 m |
7.4 ft | |
Limited slip differential | No |
Approximate shipping weight (open-station; cab) | 655 kg |
1444 lb | |
Tires | |
Front | R4 - 18x8.5-10 |
Rear | R4 - 26x12-12 |
Front tread range | 91.8 cm |
36.1 in. | |
Rear tread spacing | --- |
Miscellaneous | |
Toolbox | Yes |
Tilt steering wheel | --- |
12-V Outlet | --- |
Date collected | --- |