John Deere 8345R

Features
- 345 Engine hp
- John Deere PowerTech™ 9.0L PSS
- Choice of 16-speed PowerShift, e23™ PowerShift, or Infinitely Variable Transmission (IVT™)
- MFWD, or Independent Link Suspension (ILS™)
Specifications
Model | John Deere 8345R |
Official Test | |
Nebraska Test number | TBD Nebraska Test |
ENGINE | |
Manufacturer | John Deere |
Engine family | 9.0L: EJDXL09.0301 |
Aspiration | Dual turbochargers, variable geometry turbo with fixed geometry turbo in series |
Cylinders/Displacement, cu. in. (L) | 6 cylinders/9.0 L549 cu in. |
Cylinder Liners | Wet |
Fuel tank capacity, US Gal. (L) (Open; Cab) | Standard With G47/48 tires: 645 L 170.4 U.S. gal. With G49 tires: 686 L 181.2 U.S. gal. |
PERFORMANCE | |
Advertised PTO hp (kW) @ Rated rpm | At 2100 per SAE: 216 kW 291 hp |
Advertised Engine hp (kW) @ Rated speed | At 2100 per 97/68EC PS: 254 kW 345 hp |
TRANSMISSION | |
Std. Transmission; Forward/Reverse | IVT (42) km |
Opt. Transmission; Forward/Reverse | e23; 23/11 (42 or 50) km/h IVT (50) km/h |
Reverser | Left-hand or Right-hand |
On-the-Go Shifting (Yes/No/Partial) | Yes |
Clutch; Wet/Dry | Wet |
Creeper | IVT |
POWER TAKE-OFF (PTO) | |
Standard | 45 mm 1.75 in. 20 spline, 1000 rpm |
Optional | 45 mm (1.75 in.), 20 spline, 1000 rpm and 1000E economy rpm, in-cab shiftable45 mm (1.75 in.), 20 spline, 1000 rpm, capable of 35 mm (1.375 in.), 6/21 spline, 540/1000 rpm |
PTO Speeds @ Engine rpm | IVT: 1000 PTO rpm @ 2000 engine rpm, 1000 ECO PTO @ 1594 engine rpm, and 540 PTO rpm @ 1814 engine rpm e23: 1000 PTO rpm @ 1995 engine rpm, 1000 ECO PTO @ 1590 engine rpm, and 540 PTO rpm @ 1810 engine rpm |
PTO Actuation | Electrohydraulic |
HYDRAULICS | |
Type | Closed-center, pressure/flow compensated |
Pump Rated Output, GPM (L/min.) | Standard227.1 L/min60 gpmOptional321 L/min85 gpm |
Rated Flow @ One SCV, GPM (L/min.) | Rear: 0.5 in.SCV: 132 L/min35 gpm Rear: 0.75 in. SCV: 153 L/min 40.5 gpm Front SCV: 96 L/min 25 gpm |
Maximum Operating Pressure, psi (kPa) | 20,400 (+ or - 300) kPa 2958 psi |
Hitch Draft Control Load Sense Type | Electronic |
Remote Control Valves Available | Standard: four Optional: five or six 2 Front SCV option |
Hitch Category (SAE Designation) | Cat 4N/3 |
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. | Standard Cat 4N/3: 9072 kg 20,000 lb Optional Cat 4N/3: 6803 kg 15,000 lb |
Sensing type | Electrohydraulic |
Joystick SCV control | Electrohydraulic optional |
FINAL DRIVE | |
Type | Inboard planetary |
Differential controls | Electrohydraulic |
Availability | Front Yes Front & Rear Yes Yes |
Engage On-the-Go Rear Differential Lock | Yes |
Axle Type | Bar axle, rack and pinion |
Brakes, Type and Control | Hydraulic wet disc |
OPERATOR STATION | |
Rollover Protective Structure, OOS | Gearshift Location - Console/Floor CommandARM |
Cab | Doors left hand Platform - Flat/Straddle Flat Seat Suspension System Standard: air Optional: active seat Optional: cab suspension with air seat |
2WD DIMENSIONS | |
Approx. Ship Wt, lb (kg) Open; Cab | ILS/IVT with 625-kg (1378-lb) inner weights, front weight support, Cat4 hitch with QC, 113.6 L (30 gal.) fuel, 480/80R50 rear duals, 420/85R34 front duals:15,009 kg 33,091 lb |
MFWD DIMENSIONS | |
Wheelbase, in. (mm) | MFWD: 3080 mm 121.3 in. ILS: 3050 mm 120.1 in. |
Front Tread Range, in. (mm) | 1500 MFWD/ILS: 1524-3657 mm 60-144 in. |
Front Axle Clearance, in. (mm) | MFWD: 696 mm 27 in.ILS: 590 mm 23.2 in. |
Limited Slip Differential | Hydraulic lock differential |
Approx. Ship Wgt, lb (kg) Open; Cab | ILS/IVT with: Inner weights: 625 kg1378 lb front weight support/Cat4 hitch with QC/Fuel 113.6 L30 U.S. gal. 480/80R50 duals/420/85R34 front duals 14,828 kg 32,691 lb |
STANDARD TIRES | |
MFWD | Front 420/85R34 Rear 480/80R50 |
MISCELLANEOUS | |
Country of Manufacture | Waterloo, IA USA |
Ballasting Restrictions, lb (kg) | Refer to operator's manual |
*Notes |