John Deere 6175M

Double tap to zoom



  • 175-hp John Deere FT4 PowerTech™ engine
  • 30-GPM pressure-flow compensated system
  • Choose from a range of available transmissions


Manufacturer John Deere
Model 6175M
Manufacturer  John Deere PowerTech™ PSS (B20 Diesel Compatible)  
Aspiration  Variable Geometry Turbocharger second stage - air-to-air aftercooling and cooled exhaust gas recirculation  
Cylinders/Displacement, cu. in. (L)  6/6.8 L 
   6/414 cu in. 
Cylinder Liners  Wet sleeve  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  340 L 
   90 U.S. gal. 
Optional  ---  
Underhood muffler  Yes  
Advertised PTO hp (kW) @ Rated rpm  106 @ 2100 kW 
   142 @ 2100 hp 
Advertised Engine hp (kW) @ Rated speed  130 @ 2100 kW 
   175 @ 2100 hp 
Std. Transmission; Forward/Reverse  16 Speed PowrQuad PLUS™ Transmission 30K (Cab Only)  
Opt. Transmission; Forward/Reverse  20 Speed PowrQuad PLUS Transmission 40K (Cab Only); 20 Speed AutoQuad PLUS™ Transmission 40K (Cab Only)  
Reverser  Left-hand base  
On-the-Go Shifting (Yes/No/Partial)  Yes  
Clutch; Wet/Dry  Wet  
Creeper  Yes  
Power Take-Off (PTO)  
Standard  Independent 1-3/8 in., 540/1000 reversible shaft  
Optional  Independent 540 rpm  
PTO Actuation  Electrohydraulic  
Type  Pressure & Flow Compensated (PFC) System with Load Sensing Function  
Standard  114 L/min 
   30 gpm 
Maximum Operating Pressure, psi (kPa)  20,000 kPa 
   2900 psi 
Hitch Draft Control Load Sense Type  Electrohydraulic  
Remote Control Valves Available  Up to 3 rear mechanical or 3 with power beyond, 3 mid-mount mechanical  
Hitch Category (SAE Designation)  Category 2/3N  
Standard  4852 Advertised kg 
   10696 Advertised lb 
Sensing type  Electronic lower link  
Joystick SCV control  Mechanical  
Final Drive  
Type  Inboard planetary three pinion  
Differential controls  Electrohydraulic  
Availability  ---  
Front  Yes  
Front & Rear  Yes  
Engage On-the-Go Rear Differential Lock  Yes  
Axle Type  Rack and Pinion 100 length in. 
Brakes, Type and Control  Hydraulic wet disk  
Operator Station  
Rollover Protective Structure, OOS  Yes  
Gearshift Location - Console/Floor  Transmission specific  
2WD Dimensions  
Wheelbase, in. (mm)  2800 mm 
   110.2 in. 
Front Tread Range, in. (mm)  1610 to 2220 mm 
   63.3 to 87.4 in. 
MFWD Dimensions  
Wheelbase, in. (mm)  2800 mm 
   110.2 in. 
Front Tread Range, in. (mm)  1494 to 2206 mm 
   58.8 to 86.8 in. 
Front Axle Clearance, in. (mm)  607 mm 
   23.9 in. 
Turning Radius w/Brakes, ft (m)  7.1 m 
   23.5 ft 
Turning Radius w/o Brakes, ft (m)  7.1 m 
   23.5 ft 
Limited Slip Differential  Yes  
Unballasted Operating Weight, lb (kg)  7105 kg 
   15664 lb 
Approx. Ship Wgt, lb (kg) Open; Cab  7105 kg 
   15664 lb 
Standard Tires  
2WD  10.00-16 10PR F2 Bias - Front in. 
   460/85R38 149A8 R1W Radial - Rear in. 
Front  380/85R28 133A8 R1W Radial in. 
Rear  460/85R38 149A8 R1W Radial in. 
Country of Manufacture  Mannheim, Germany  
Ballasting Restrictions, lb (kg)  Refer to Operator's Manual  
*Notes  Updated - 02/27/2015