John Deere 6155M

Double tap to zoom



  • 155-hp John Deere FT4 PowerTech™ engine
  • Available in cab or open-station configuration
  • 30-GPM pressure-flow compensated system
  • Choose from a range of available transmissions


Manufacturer John Deere
Model 6155M
Manufacturer  John Deere PowerTech™ PSS (B20 Diesel Compatible)  
Aspiration  Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation  
Cylinders/Displacement, cu. in. (L)  6/414 cu in.  (6/6.8 L)
Cylinder Liners  Wet sleeve  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  78 U.S. gal.  (295 L)
Underhood muffler  Yes  
Advertised PTO hp (kW) @ Rated rpm  123 @ 2100 hp (91 @ 2100 kW)
Advertised Engine hp (kW) @ Rated speed  155 @ 2100 hp (116 @ 2100 kW)
Std. Transmission; Forward/Reverse  16 Speed PowrQuad Transmission 30K (OOS Only); 16 Speed PowrQuad PLUS™ Transmission 30K (Cab Only)  
Opt. Transmission; Forward/Reverse  20 Speed PowrQuad Transmission 40K (OOS Only);16 Speed PowrQuad PLUS™ Transmission 30K (Cab Only); 20 Speed PowrQuad PLUS Transmission 40K (Cab Only); 20 Speed AutoQuad PLUS™ Transmission 40K (Cab Only)  
Reverser  Left-hand base  
On-the-Go Shifting (Yes/No/Partial)  Yes  
Clutch; Wet/Dry  Wet  
Creeper  Yes  
Power Take-Off (PTO)  
Standard  Independent 1-3/8 in., 540/1000 reversible shaft  
Optional  Independent 540 rpm  
PTO Actuation  Electrohydraulic  
Type  Pressure & Flow Compensated (PFC) System with Load Sensing Function  
Pump Rated Output, GPM (L/min.)  ---  
Standard  30 gpm  (114 L/min)
Maximum Operating Pressure, psi (kPa)  2900 psi (20,000 kPa)
Hitch Draft Control Load Sense Type  Electrohydraulic  
Remote Control Valves Available  Up to 3 rear mechanical or 3 with power beyond, 3 mid-mount mechanical  
Hitch Category (SAE Designation)  Category 2/3N  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  ---  
Standard   8198 Advertised lb  (3719 Advertised kg)
Optional  9193 Advertised lb (4170 Advertised kg)
Sensing type  Electronic lower link  
Joystick SCV control  Mechanical  
Final Drive  
Type  Inboard planetary three pinion  
Differential controls  Electrohydraulic  
Availability  ---  
Front  Yes  
Front & Rear  Yes  
Engage On-the-Go Rear Differential Lock  Yes  
Axle Type  Flanged axle, 8 position adjustable steel wheels - Base  
 Flanged axle with 2-Position Fixed Cast Wheels - Option  
 86 x 2550 with 2-Position Fixed Cast Wheels mm 
 3.385 x 100.4 with 2-Position Fixed Cast Wheels in. 
Brakes, Type and Control  Hydraulic wet disk  
Operator Station  
Rollover Protective Structure, OOS  Yes  
Gearshift Location - Console/Floor  Transmission specific  
2WD Dimensions  
Wheelbase, in. (mm)  108.9 in. (2765 mm)
Front Tread Range, in. (mm)  63.3 to 87.4 in.  (1610 to 2220 mm)
MFWD Dimensions  
Wheelbase, in. (mm)  108.9 in.  (2765 mm)
Front Tread Range, in. (mm)  58.8 to 86.8 in. (1494 to 2206 mm)
Front Axle Clearance, in. (mm) 23.9 in.  (607 mm)
Turning Radius w/Brakes, ft (m) 23.5 ft (7.1 mm)
Turning Radius w/o Brakes, ft (m)  23.5 ft (7.1 mm)
Limited Slip Differential  Yes  
Unballasted Operating Weight, lb (kg) 13073 lb (5930 kg)
Approx. Ship Wgt, lb (kg) Open; Cab 13073 lb (5930 kg)
Standard Tires  
2WD  10.00-16 10PR F2 Bias - Front in. 
   460/85R38 149A8 R1W Radial - Rear in. 
Front  380/85R28 133A8 R1W Radial in. 
Rear  460/85R38 149A8 R1W Radial in. 
Country of Manufacture  Mannheim, Germany  
Ballasting Restrictions, lb (kg)  Refer to Operator's Manual  
*Notes  Updated - 02/27/2015