John Deere 9620RX

Features
- Cummins QSX15 Engine
- e18™ PowerShift Transmission
- New Cab Suspension
- CommandView™ III cab
Specifications
Manufacturer | John Deere |
Model | 9620RX |
Engine | |
Manufacturer | Cummins |
Engine family | QSX15 |
Aspiration | Single Variable geometry turbocharger air-to-air aftercooling and cooled exhaust gas recirculation |
Cylinders/Displacement, cu. in. (L) | 912 cu in. (14.9 L ) |
Cylinder Liners | Wet-sleeve |
Standard | 400 U.S. gal. (1514 L ) |
Performance | |
Advertised PTO hp (kW) @ Rated rpm | 335 hp ( 250 kW ) |
Advertised Engine hp (kW) @ Rated speed | 620 hp (456 kW ) |
Max Torque Rise (80% rtd spd) @ Eng rpm | 36 percent |
Transmission | |
Std. Transmission; Forward/Reverse | e18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™ |
Power Take-Off (PTO) | |
Optional | 45 mm 20-spline 1000 rpm 1.75 in. |
Hydraulics | |
Type | Closed-center, pressure/flow compensated |
Pump Rated Output, GPM (L/min.) | Standard: 58 gpb (220 L/min) |
Optional: 115 gpm (435 L/min) | |
Rated Flow @ One SCV, GPM (L/min.) | Standard coupler: 132 L/min 35 gpm 12.7 mm 0.5 in. Optional coupler: 159 L/min 42 gpm 19.0 mm 0.75 in. |
Maximum Operating Pressure, psi (kPa) | 2900 psi (20,000 kPa ) |
Hitch Draft Control Load Sense Type | Electrohydraulic |
Remote Control Valves Available | 4 - 6 factory, up to 8 field installed |
Hitch Category (SAE Designation) | 4N/Cat. 4 |
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. | 15,000 lb (6804 kg) |
Standard | 15,000 lb (6804 kg) |
Optional | 20,000 (9072 kg) |
Sensing type | Electrohydraulic |
Final Drive | |
Type | Bull gear and double idler with floating pinion |
Brakes, Type and Control | Hydraulic power, wet disk, self adjusting on front and rear axle |
Standard Tires | |
Track widths | Standard: 30 in. (762 mm) Optional: 36 in. (914 mm) |
Miscellaneous | |
Country of Manufacture | Waterloo, Iowa, USA |
Ballasting Restrictions, lb (kg) | Lesser of 54,000 lb (24,494 kg) or Tire Capacity |