John Deere 9570RX
9R/9RT/9RX Series 9570RX
Overview:
The 9RX Series Tractors are the perfect combination of power, performance and intelligence all wrapped up in a 4-Track. With models from 470 to 620 engine horsepower, proven Final Tier 4 engines, integrated technology and increased hydraulic flow, the 9RX Series is all in to go all out. Built to pull large implements t... + Read More
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Features
- Cummins QSX15 Engine
- e18™ PowerShift Transmission
- New Cab Suspension
- CommandView™ III cab
Specifications
| Manufacturer | John Deere |
| Model | 9570RX |
| Engine | |
| Manufacturer | Cummins |
| Engine family | QSX15 |
| Aspiration | Single Variable geometry turbocharger air-to-air aftercooling and cooled exhaust gas recirculation |
| Cylinders/Displacement, cu. in. (L) | 912 cu in. (14.9 L) |
| Cylinder Liners | Wet-sleeve |
| Standard | 400 U.S. gal (1514 L) |
| Performance | |
| Advertised PTO hp (kW) @ Rated rpm | 335 hp (250 kW) |
| Advertised Engine hp (kW) @ Rated speed | 570 hp (419 kW) |
| Max Torque Rise (80% rtd spd) @ Eng rpm | 38 percent |
| Transmission | |
| Std. Transmission; Forward/Reverse | e18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™ |
| Power Take-Off (PTO) | |
| Optional | 45 mm 20-spline 1000 rpm 1.75 in. |
| Hydraulics | |
| Type | Closed-center, pressure/flow compensated |
| Pump Rated Output, GPM (L/min.) |
Standard |
| 58 gpm (220 L/min) | |
| Optional | |
| 115 gpm (435 L/min) | |
| Rated Flow @ One SCV, GPM (L/min.) | Standard coupler: 35 gpm (132 L/min) 0.5 in. (12.7 mm) Optional coupler: 42 gpm (159 L/min) 0.75 in. (19.0 mm) |
| Maximum Operating Pressure, psi (kPa) | 2900 psi (20,000 kPa) |
| Hitch Draft Control Load Sense Type | Electrohydraulic |
| Remote Control Valves Available | 4 - 6 factory, up to 8 field installed |
| Hitch Category (SAE Designation) | 4N/Cat. 4 |
| Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. | 15,000 lb (6804 kg) |
| Standard | 15,000 lb (6804 kg) |
| Optional | 20,000 lb (9072 kg) |
| Sensing type | Electrohydraulic |
| Final Drive | |
| Type | Bull gear and double idler with floating pinion |
| Brakes, Type and Control | Hydraulic power, wet disk, self adjusting on front and rear axle |
| Standard Tires | |
| Track widths | Standard: 30 in. (762 mm) Optional: 36 in. (914 mm) |
| Miscellaneous | |
| Country of Manufacture | Waterloo, Iowa, USA |
| Ballasting Restrictions, lb (kg) | Lesser of 54,000 lb (24,494 kg) 54,000 lb or Tire Capacity |