John Deere 9520RX 4-Track, Wide or Narrow Tractor

Double tap to zoom



  • New Narrow Tractor or wide undercarriage
  • John Deere PowerTech™ 13.5L Engine
  • e18™ PowerShift Transmission
  • CommandView™ III cab


Manufacturer John Deere
Model 9520RX
Manufacturer  John Deere  
Engine family  PowerTech™ PSS 13.5L  
Aspiration  Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation  
Cylinders/Displacement, cu. in. (L)  13.5 L 
   824 cu in. 
Cylinder Liners  Wet-sleeve  
Standard  1514 L 
   400 U.S. gal. 
Advertised PTO hp (kW) @ Rated rpm  250 kW 
   335 hp 
Advertised Engine hp (kW) @ Rated speed  382 kW 
   520 hp 
Max Torque Rise (80% rtd spd) @ Eng rpm  38 percent 
Std. Transmission; Forward/Reverse  e18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™  
Power Take-Off (PTO)  
Optional  45 mm 
 1000 rpm
 1.75 in.
Type  Closed-center, pressure/flow compensated  
Standard  220 L/min 
   58 gpm 
Optional  435 L/min 
   115 gpm 
Rated Flow @ One SCV, GPM (L/min.)  Standard coupler: 132 L/min 
 35 gpm
12.7 mm
 0.5 in.
 Optional coupler: 159 L/min
 42 gpm
 19.0 mm
 0.75 in.
Maximum Operating Pressure, psi (kPa)  20,000 kPa 
   2900 psi 
Hitch Draft Control Load Sense Type  Electrohydraulic  
Remote Control Valves Available  4 - 6 factory, up to 8 field installed  
Hitch Category (SAE Designation)  4N/Cat. 4  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  6804 kg 
   15,000 lb 
Standard  6804 kg 
   15,000 lb 
Optional  9072 kg 
   20,000 lb 
Sensing type  Electrohydraulic  
Final Drive  
Type  Bull gear and double idler with floating pinion  
Brakes, Type and Control  Hydraulic power, wet disk, self adjusting on front and rear axle  
Operator Station  
Standard Tires  
Track widths  Standard: 762 mm 
 30 in.
 Optional: 914 mm
 36 in.
Country of Manufacture  Waterloo, Iowa, USA  
Ballasting Restrictions, lb (kg)  Lesser of 24,494 kg 
 54,000 lb
 or Tire Capacity