John Deere 9420R

Features
- John Deere PowerTech™ 13.5L PSS
- New and improved e18™ PowerShift Transmission
- New CommandView™ III cab
Specifications
John Deere 9420R Tractor | |
ENGINE | |
Manufacturer | John Deere |
Engine family | PowerTech? 13.5L |
Aspiration | Fixed geometry turbocharger with air-to-air aftercooling |
Cylinders/Displacement, cu. in. (L) | 13.5 L824 cu in. |
Cylinder Liners | Wet-sleeve |
Fuel tank capacity, US Gal. (L) (Open; Cab) | Standard1173 L310 U.S. gal. |
PERFORMANCE | |
Advertised PTO hp (kW) @ Rated rpm | 250 kW335 hp |
Official PTO hp (kW) @ Rated rpm | |
Advertised Engine hp (kW) @ Rated speed | 309 kW420 hp |
Max Unballast Drwbr hp (kW) @ Eng rpm | |
Maximum Torque (PTO) @ rpm, lb-ft (Nm) | |
Max Torque Rise (80% rtd spd) @ Eng rpm | 38 percent |
Maximum Torque Rise % (PTO) @ Eng rpm | |
FUEL USE, U.S. GAL./HR & HP HR/GAL. AT: | |
PTO @ Rated Eng rpm | |
Standard PTO Speed @ Eng speed | |
Maximum PTO Power @ Eng rpm | |
Maximum Engine Power @ Eng rpm | |
Max Unballasted Drawbar Power @ Eng rpm | |
75% Load, Full Engine rpm (Unballasted) | |
75% Load @ Reduced rpm (Unballasted) | |
TRANSMISSION | |
Std. Transmission; Forward/Reverse | e18? 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager? |
Opt. Transmission; Forward/Reverse | |
Reverser | |
On-the-Go Shifting (Yes/No/Partial) | |
Clutch; Wet/Dry | |
Creeper | |
POWER TAKE-OFF (PTO) | |
Standard | |
Optional | 45 mm1.75 in.20-spline1000 rpm |
PTO Speeds @ Engine rpm | |
PTO Actuation | Electronic |
HYDRAULICS | |
Type | Closed-center, pressure/flow compensated |
Pump Rated Output, GPM (L/min.) | Standard220 L/min58 gpmOptional435 L/min115 gpm |
Rated Flow @ One SCV, GPM (L/min.) | Standard coupler: 132 L/min35 gpm12.7 mm0.5 in.Optional coupler: 159 L/min42 gpm19.0 mm0.75 in. |
Max Output @ SCV Couplers, GPM (L/min.) | |
Maximum Operating Pressure, psi (kPa) | 20,000 kPa2900 psi |
Maximum Hydraulic Power, hp (kW) | |
Hitch Draft Control Load Sense Type | Electrohydraulic |
Remote Control Valves Available | 4 - 6 factory, up to 8 field installed |
Hitch Category (SAE Designation) | 4N/Cat. 3, 4N/Cat. 4 |
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. | Standard6804 kg15,000 lbOptional9072 kg20,000 lb6804 kg15,000 lb |
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE) | |
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE) | |
Sensing type | Electrohydraulic |
Joystick SCV control | |
FINAL DRIVE | |
Type | Inboard planetary |
Differential controls | Full-locking electrohydraulic |
Availability | Front & RearStandard |
Engage On-the-Go Rear Differential Lock | |
Axle Type | |
Brakes, Type and Control | Hydraulic power, wet disk, self adjusting on front and rear axle, plus secondary brake |
OPERATOR STATION | |
Rollover Protective Structure, OOS | |
Cab | |
2WD DIMENSIONS | |
Wheelbase, in. (mm) | |
Front Tread Range, in. (mm) | |
Rear Tread Range, in. (mm) | |
Minimum Rear Tread Setting, in. (mm) | |
Front Axle Clearance, in. (mm) | |
Turning Radius w/Brakes, ft (m) | |
Turning Radius w/o Brakes, ft (m) | |
Unballasted Operating Weight, lb (kg) | |
Approx. Ship Wgt, lb (kg) Open; Cab | |
MFWD DIMENSIONS | |
Wheelbase, in. (mm) | |
Front Tread Range, in. (mm) | |
Front Axle Clearance, in. (mm) | |
Turning Radius w/Brakes, ft (m) | |
Turning Radius w/o Brakes, ft (m) | |
Limited Slip Differential | |
Unballasted Operating Weight, lb (kg) | |
Approx. Ship Wgt, lb (kg) Open; Cab | |
4WD DIMENSIONS | |
Wheelbase, in. (mm) | 3807 mm149.9 in. |
Wheel Tread, Min. to Max. in. (mm) | |
Turning Radius w/o Brakes, ft (m) | 5547 mm - Group 47 Tires18.2 ft - Group 47 Tires5883 mm - Group 48 Tires19.3 ft - Group 48 Tires |
Nebraska Test Unballasted w/Duals, lb (kg) | |
Unballasted Weight, lb (kg) | |
STANDARD TIRES | |
2WD | |
MFWD | |
4WD | |
Track widths | |
MISCELLANEOUS | |
Country of Manufacture | Waterloo, Iowa, USA |
Ballasting Restrictions, lb (kg) | Lesser of 22,105 kg48,700 lbor Tire Capacity |
*Notes |