John Deere 9570RX Scraper Special

Double tap to zoom



  • Cummins QSX15 Engine
  • e18™ PowerShift Transmission
  • New Cab Suspension
  • CommandView™ III cab


Manufacturer John Deere
Model 9570RX
Manufacturer  Cummins  
Engine family  QSX15  
Aspiration  Single Variable geometry turbocharger air-to-air aftercooling and cooled exhaust gas recirculation  
Cylinders/Displacement, cu. in. (L)  14.9 L 
   912 cu in. 
Cylinder Liners  Wet-sleeve  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  1514 L 
   400 U.S. gal. 
Advertised PTO hp (kW) @ Rated rpm  250 kW 
   335 hp 
Advertised Engine hp (kW) @ Rated speed  419 kW 
   570 hp 
Max Torque Rise (80% rtd spd) @ Eng rpm  38 percent 
Std. Transmission; Forward/Reverse  e18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™  
Power Take-Off (PTO)  
Standard  ---  
Optional  45 mm 
   1000 rpm 
   1.75 in. 
Type  Closed-center, pressure/flow compensated  
Pump Rated Output, GPM (L/min.)  ---  
Standard  220 L/min 
   58 gpm 
Optional  435 L/min 
   115 gpm 
Rated Flow @ One SCV, GPM (L/min.)  Standard coupler: 132 L/min 
   35 gpm 
   12.7 mm 
   0.5 in. 
   Optional coupler: 159 L/min 
   42 gpm 
   19.0 mm 
   0.75 in. 
Maximum Operating Pressure, psi (kPa)  20,000 kPa 
   2900 psi 
Hitch Draft Control Load Sense Type  Electrohydraulic  
Remote Control Valves Available  4 - 6 factory, up to 8 field installed  
Hitch Category (SAE Designation)  4N/Cat. 4  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  6804 kg 
   15,000 lb 
OECD  ---  
Standard  6804 kg 
   15,000 lb 
Optional  9072 kg 
   20,000 lb 
Sensing type  Electrohydraulic  
Final Drive  
Type  Bull gear and double idler with floating pinion  
Brakes, Type and Control  Hydraulic power, wet disk, self adjusting on front and rear axle  
Standard Tires  
Track widths  Standard: 762 mm 
   30 in. 
   Optional: 914 mm 
   36 in. 
Country of Manufacture  Waterloo, Iowa, USA  
Ballasting Restrictions, lb (kg)  Lesser of 24,494 kg 
   54,000 lb 
   or Tire Capacity