John Deere 956
Pull-Type Mower Conditioners 956
Overview:
For extra-wide cutting in your largest fields, get the versatile performance of a 900 Series MoCo. The 956 Mower-Conditioners offer a wide cutting width without sacrificing in-field maneuverability or performance. With a cutting width of 14 feet, 6 inches on the 956, these MoCo’s will make short work of your largest fields.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Features
- Modular-design cutterbar
- Steel roll conditioners
- Adjustable roll pressure
- Hydraulic tongue positioning
Specifications
| Manufacturer | John Deere |
| Model | 956 (Center-Pivot) |
| Power requirements | |
| PTO speed | 1,000 rpm |
| HP 540 rpm PTO | --- |
| HP 1000 rpm 1-3/8 in. PTO | 75-112 kW (100-150 hp) |
| HP 1000 rpm 1-3/4 in. PTO | 86-134 kW (115-180 hp ) |
| Powerline type | Grob Spline |
| Hydraulic pressure required | 17,237 kPa (2,500 psi) |
| Cutterbar | |
| Type | John Deere |
| Cutting width | 4.5 m (14.5 ft ) |
| Cutting height | 1.6-11.8 cm (0.63-4.6 in.) |
| Number of disks | 9 |
| Number of knives | 18 |
| Disk speed | 2,650 rpm |
| Knife tip speed | 307 km/h (191 mph ) |
| Disk drive | Gear |
| Lubrication | Hy-Gard Oil |
| Oil reservoir capacity | 10.4 L ( 11 U.S. qt ) |
| Cutterbar oil check | Combination sight glass, drain plug |
| Cutterbar angle | Adjustable |
| Angle adjustment | Mechanical standard |
| Hydraulic optional | |
| Angle range | 2-8 degree (angle) |
| Cutterbar protection | Shearhub |
| Adjustable gauge shoes | 2 standard |
| Conditioner | |
| Width | 268 cm (106 in.) |
| Diameter | 59.4 cm (23.4 in.) |
| Number of V-tines | 72 |
| Number of speeds | Two |
| Drive | Gear |
| Conditioner hood | Adjustable, single lever |
| Width | 269 cm (106 in.) |
| Diameter | 25.4 cm (10 in.) |
| Type of material | Urethane/steel |
| Design | Recessed cleat (Urethane) |
| Intermeshing flutes (V-10 and Tri-Lobe) | |
| Speed | 800 rpm |
| Drive | Gear |
| Tractor hookup | |
| Rockshaft swivel hitch | Standard |
| Drawbar swivel hitch | Optional |
| Dimensions | |
| Transport | 4.5 m (14.7 ft) |
| With optional trailer | 2.9 m (9.7 ft ) |
| Conventional transport | 8.2 m (26.9 ft) |
| With optional trailer | 9.4 m (30.8 ft) |
| Weight | --- |
| With urethane roll conditioner | 3,161 kg (6,969 lb) |
| With V-10 steel roll conditioner | 3,270 kg (7,209 lb) |
| With tri-lobe steel roll conditioner | 3,325 kg (7,330 lb) |
| With impeller conditioner | 3,055 kg (6,785 lb) |
| Standard tires | 31x13.5-15, 8 PR |
| General | |
| Are wrenches required for adjusting? | --- |
| Float | No |
| Roll spacing | Yes |