John Deere 835
Pull-Type Mower Conditioners 835
Overview:
800 Series Mower Conditioners can now be ordered with V10 rolls and a Wide Swath Kit. The V10 chevron conditioning rolls and Wide Swath Kit crimp your crop even better and spread your windrow 25% wider to give you a big increase in dry down speed. The 835 Mower-Conditioner delivers a fast, clean cut, field after field,... + Read More
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Features
- Optional V10 rolls and Wide Swath Kit
- Modular-design cutterbar
- Adjustable roll pressure
- Hydraulic tongue positioning
Specifications
| Model | John Deere 835 Mower-Conditioner |
| POWER REQUIREMENTS | |
| PTO speed | 1,000 rpm |
| HP 1000 rpm 1-3/8 in. PTO | 67-112 kW (90-150 hp) |
| Powerline type | Double-telescoping Grob spline (swivel is tube) |
| Hydraulic pressure required | 13,790 kPa (2,000 psi) |
| CUTTERBAR | |
| Type | John Deere |
| Cutting width | 3.5 m (11.5 ft) |
| Cutting height | 2-9.5 cm (0.8-3.7 in.) |
| Number of disks | 7 |
| Number of knives | 14 |
| Disk speed | 2,650 rpm |
| Knife tip speed | 307 km/h (191 mph) |
| Disk drive | Gear |
| Lubrication | Hy-Guard oil |
| Oil reservoir capacity | 8 L (8.5 U.S. qt) |
| Cutterbar oil check | Combination check, drain plug |
| Cutterbar angle | Adjustable |
| Angle adjustment | Mechanical |
| Cutterbar protection | Shear hub |
| Adjustable gauge shoes | Yes |
| CONDITIONER | |
| Impeller | Width: 236 cm (92.7 in.); Diameter 60 cm (23.5 in.); Number of V-tines: 57; Number of speeds: Two; Drive: 3-V powerband belt and sheaves; Conditioner hood: Adjustable |
| Rolls | Width: 236 cm (92.7 in.) Diameter: 25.4 cm (10 in.); Type of material: Urethane; Design: Recessed cleat; Speed 644 rpm; Drive: Telescoping shaft |
| TRACTOR HOOKUP | |
| Ball joint equal angle hitch | Standard |
| Rockshaft swivel hitch | Optional |
| DIMENSIONS | |
| Overall width | Transport 3.5 m (11.5 ft) |
| Overall length | Conventional transport 6.3 m (20.6 ft) |
| Weight | With urethane roll conditioner: Equal angle: 2,633 kg (5,805 lb); With impeller conditioner: Equal angle: 2,479 kg (5,465 lb) |
| Standard tires | 11L-15 standard (31x13.5L) 15 optional |
| GENERAL | |
| Are wrenches required for adjusting? | Roll pressure: Yes; Roll spacing: Yes; Header tilt: Yes |