John Deere 635

Double tap to zoom



  • Urethane roll conditioner available
  • Cutting platform is gear-driven
  • Adjustable gauge shoes
  • Flotation tires
  • Wide swath kit
  • Modular-design cutter bar
  • Equal-angle hitch
  • Impeller conditioner


Model John Deere 635 Mower-Conditioner
PTO speed 1,000 rpm
HP 1000 rpm 1-3/8 in. PTO 67-112 kW (90-150 hp)
Powerline type Double-telescoping Grob spline
Hydraulic pressure required 13,790 kPa (2,000 psi)
Type John Deere
Cutting width 3.5 m (11.5 ft)
Cutting height 28-98 cm (1.1-3.72 in.)
Disk speed 2,650 rpm
Knife tip speed 307 km/h (191 mph)
Disk drive Gear
Lubrication Hy-Gard oil
Oil reservoir capacity 8 L (8.5 U.S. qt)
Cutterbar oil check Drain plug
Cutterbar angle Adjustable
Angle adjustment Mechanical or hydraulic
Cutterbar protection Shear hub
Adjustable gauge shoes Yes
Impeller Width 236 cm (92.7 in.); Diameter 59.4 cm (23.4 in.); Number of V-tines: 57; Number of speeds: Two; Drive: 3-V powerband belt and sheaves; Conditioner hood; Infinite adjust, single hand crank
Rolls Width 236 cm (92.7 in.); Diameter 25.4 cm (10 in.); Type of material: Urethane; Design: Recessed cleat; Speed: 664 rpm; Drive: Telescoping shaft
Standard hitch Clevis
Ball joint equal angle hitch Optional
Rock shaft swivel hitch Optional
Overall width Transport 3.5 m (11.5 ft)
Overall length Conventional transport 6.3 m (20.6 ft)
Weight With urethane roll conditioner 2,388 kg (5,264 lb); With impeller conditioner 2,233 kg (4,923 lb)
Standard tires 11L-15 standard (31x13.5L) 15 optional
Are wrenches required for adjusting? Roll pressure: Yes; Roll spacing: Yes