John Deere 630

Double tap to zoom



  • Urethane roll conditioner available
  • Wide swath kit
  • Modular-design cutterbar
  • Equal-angle hitch
  • Impeller conditioner


Model John Deere 630 Mower-Conditioner
PTO speed 540 or 1,000 rpm
HP 1000 rpm 1-3/8 in. PTO 48-112 kW (65-150 hp)
Powerline type Double-telescoping Grob spline
Hydraulic pressure required 13,790 kPa (2,000 psi)
Type John Deere
Cutting width 3.0 m (9.75 ft)
Cutting height Without extension: 28 to 98 mm (1.1 to 3.7 in.)
Number of disks 6
Number of knives 12
Disk speed 2,650 rpm
Knife tip speed 307 km/h (191 mph)
Disk drive Gear
Lubrication Hy-Gard oil
Oil reservoir capacity 7 L (7.4 qt)
Cutterbar oil check Drain plug
Cutterbar angle Adjustable
Angle adjustment Mechanical or hydraulic
Cutterbar protection Shear hub
Adjustable gauge shoes Yes
Impeller Width 1,854 mm (73 in.); Diameter 594 mm (23.4 in.); Number of V-tines: 45; Number of speeds: TwoDrive; 3-V power-band belt and sheaves; Conditioner hood; Infinite adjust, single hand crank
Rolls Width 1,854 mm (73 in.); Diameter 254 mm (10 in.); Type of material: Urethane; Design: Recessed cleat; Speed: 664 rpm; Drive: Telescoping shaft
Standard hitch Clevis
Ball joint equal angle hitch Optional
Rock shaft swivel hitch Optional
Overall width Transport 3 m (9.75 ft)
Overall length Conventional transport With equal angle tongue: 6.2 m (20.5 ft)
Weight With urethane roll conditioner 2,273 kg (5,012 lb); With impeller conditioner 2,130 kg (4,696 lb)
Standard tires 11L-15 standard (31x13.5L) 15 optional
Are wrenches required for adjusting? Roll pressure: Yes; Roll spacing: Yes