John Deere 8100

Features
Optimal design and positioning of components increases crop delivery performance
ProDrive™ coupled with large tires boost performance and uptime in soft conditions
Heavier designed components increase reliability while improving uptime and lowering cost of operation
Best-in-class power efficiency delivers unmatched performance in the field
Advanced comfort and serviceability improve performance and uptime
Specifications
MODEL | John Deere 8100 Self-Propelled Forage Harvester |
ENGINE POWER | |
Maximum power at 1900 rpm | 279 kW (380 PS / 375 hp) |
Rated power at 2100 rpm | 251 kW (340 PS / 337 hp) |
Fuel tank capacity | 1100 L (290.6 U.S. gal.) |
ENGINE | |
Manufacturer | John Deere |
Type | PowerTech? PSS 9.0L Exhaust emission regulation compliancy - Final Tier 4 |
Model | North America: 6090HZ015 |
Displacement | 9 L (549 cu in.) |
Cylinders | In line six |
Fuel system | Common rail plus four valves |
COOLING SYSTEM | |
Cooling system capacity | 82 L (21.66 U.S. gal.) |
Cooling fan drive | Direct |
DRIVELINE | |
Ground drive | Standard: Hydrostatic, 3-speed - manual shift with helical gears; Engine rpm on road: 1650 rpm; Optional: Prodrive, autoshift transmission, differential lock (automatic and manual), automatic wet brake system; Engine rpm on road: 1650-2100 rpm |
Hydraulics | Load sensing |
Crop harvesting unit | Harvest channel standard |
Crop flow components | Low-friction crop-flow concept |
Main clutch | Dry clutch |
Number of discs | One disc |
Main driveband | Reinforced with Kevlar inserts |
Belt tensioning | Active, hydraulic pressure |
Main driveband, polybelt belts | Six belts |
ELECTRICAL SYSTEM/ELECTRICAL AND HYDRAULIC SYSTEM | |
Type/voltage | 12 V |
Batteries/battery quantity/capacity | 1 x 174 amp-hr |
Alternator | 200 amp |
Hydraulic system capacity | 50 L (13.2 U.S. gal.) |
GROUND DRIVE | |
Type | Standard: hydrostatic, 3-speed manual shiftOptional: Prodrive, autoshift transmission |
Differential lock | Manual or automatic (optional comes with ProDrive) |
Maximum transport speed | Hydrostatic transmission: 30 km/h (18.6 mph); ProDrive transmission: 40 km/h (24.9 mph) |
Rear axle type | Hydro-mechanical 4WD |
Automatic wet brake system | Available with ProDrive transmission |
Engine rpm - Management | Optional |
CAB | |
Tilt and extend steering column | Standard |
Air conditioning and heater | Standard - ClimaTrak |
Cool box | Optional |
Trainee seat | Standard |
Hectare counter | Standard |
Operator information system | Cornerpost display |
CAN-BUS electronics | Standard |
Operator's seat | Air-suspension seat standard |
Side window wiper | Rear and side window wiper optionalParallel-type windscreen wiper |
Electric adjust and heated | Optional on rear view mirrors |
Rear view mirrors | Standard |
MACHINE MANAGEMENT SOLUTIONS | |
Yield monitoring | Harvest Monitor: optional |
Documentation | Harvest Doc: optional |
Crop analysis | HarvestLab: optional |
Length-of-cut control based on crop parameter | Infinitely variable length-of-cut (IVLOC) standard; AutoLOC optional - use with HarvestLab |
Satellite (GPS) assisted steering | AutoTrac optional |
CROP-HARVESTING UNITS | |
Header height control | Advanced header control (AHC) optional |
Grass pick-ups | 3.0, 4.0, 4.5 m (9.8, 13.1, 14.8 ft) |
Maize or corn headers | |
HARVEST CHANNEL | |
Width | |
LENGTH OF CUT | |
Range | 40 knives: 7-26 mm (0.275-1.0 in.) LOC / 1 mm (0.04 in.) steps; 48 knives: 6-22 mm (0.24-0.87 in.) LOC / 1 mm (0.04 in.) steps |
FEEDING SYSTEM/FEEDROLLS | |
Feed roll frame opening | Swing away, 37-45 degree (angle) |
Number | Four |
Metal detector | StandardStone detector is optional |
Width, front | 660 mm (26 in.) |
Standard feed roll drive | Hydro feedroll drive IVLOC standard; Infinitely header drive speed standard |
CUTTERHEAD | |
Knife drum width | 680 mm (26.8 in.) |
Knife drum diameter | 668 mm (26.3 in.) |
Speed at rated engine speed | 1100 rpm |
Knife types available (crop) | Straight - grassCurved - corn |
Number of knives | 40 or 48 |
KNIFE SHARPENING SYSTEM | |
Reverse rotation | Yes |
Automatic from cab | Yes, remote from cab |
Reverse drive | Standard |
KERNEL PROCESSOR | |
Type | Serrated roller |
Quick-change | Quick kernel processor - swing in/swing out |
SERRATED ROLLER (KERNEL PROCESSOR) | |
Maize, roll teeth number (speed differential) | 118 - 24 or 32 percent |
Wholecrop, roll teeth number (speed differential) | 178 - 32 percent |
Sorghum, roll teeth number (speed differential) | 238 - 32 percent |
Weight | 145 kg (320 lb) |
DISK TYPE (KERNEL PROCESSOR) | |
Number of disks (top/bottom) | 15/14 plus 2-1/2 |
Diameter of disks | 240 mm (9.45 in.) |
Weight | 172.4 kg (380 lb) |
BLOWER/CROP ACCELERATOR | |
Number of blades | 10 |
SPOUT | |
Rotation, degrees | 210 degree (angle) |
Hydraulic height position | Hydraulic raise and lower standardAutomatic spout positioning optional |
Double-cap deflection | Standard |
MAINTENANCE | |
Rotary radiator screen cleaner | Standard |
Automatic lubrication system | Optional |
Engine oil and filter change duration | JD+50 II oil: 500 hours; Other oil: 250 hours |
VEHICLE | |
With front tires | 710/70R42 |
With rear tires | 620/60R30 |
Transport length (without header) | 6.5 m (21.4 ft) |
Transport width (without header) | 3-3.5 m (9.84-11.5 ft) |
Transport height (to cab roof) | 3.89 m (12.75 ft) |
Working height (maximum) | Height to spout: 6.60 m (21.65 ft) |
PROPELLING DRIVE | |
Standard | Hydrostatic, 3-speed - manual shift with helical gears |
TRANSMISSION | |
Type | Standard: Hydrostatic, 3-speed - manual shift with helical gearsHydro-mechanical 4WD rear axle optional |
ADDITIONAL INFORMATION | |
Date collected |