John Deere 956 Mid-Pivot MoCo

Features
- Modular-design cutterbar
- Steel roll conditioners
- Adjustable roll pressure
- Hydraulic tongue positioning
Specifications
Model | John Deere 956 Mower Conditioner |
Power requirements | |
PTO speed | 1,000 rpm |
HP 1000 rpm 1-3/8 in. PTO | 100-150 hp (75-112 kW) |
HP 1000 rpm 1-3/4 in. PTO | 115-180 hp (86-134 kW) |
Powerline type | Grob spline |
Hydraulic pressure required | 2,500 psi (17,237 kPa) |
Cutterbar | |
Type | John Deere |
Cutting width | 14.5 ft (4.5 m) |
Cutting height | 0.63-4.6 in. (1.6-11.8 cm) |
Number of disks | 9 |
Number of knives | 18 |
Disk speed | 2,650 rpm |
Knife tip speed | 191 mph (307 km/h) |
Disk drive | Gear |
Lubrication | Hy-Gard oil |
Oil reservoir capacity | 11 U.S. qt (10.4L) |
Cutterbar oil check | Combination sight glass; Drain plug |
Cutterbar angle | Adjustable |
Angle adjustment | Mechanical Standard |
Angle Range | 2-8 degree (angle) |
Cutterbar protection | Shearhub |
Adjustable gauge shoes | 2 Standard |
Conditioner | |
Impeller | |
Width | 106 in. (268 cm) |
Diameter | 23.4 in. (59.4 cm) |
Number of V-tines | 72 |
Number of speeds | Two |
Drive | Gear |
Conditioner hood | Adjustable, single lever |
Rolls | |
Width | 106 in. (268 cm) |
Diameter | 10 in. (254 mm) |
Type of material | Urethane/ Steel |
Design | Recessed cleat (Urethane) |
Intermeshing flutes (V-10 and Tri-Lobe) | |
Speed | 800 rpm |
Drive | Gear |
Tractor hookup | |
Rockshaft swivel hitch | Standard |
Drawbar swivel hitch | Optional |
Dimensions | |
Overall width | |
Transport | 14.7 ft (4.5 m) |
with Optional Trailer | 9.7 ft (2.9 m) |
Overall length | |
Conventional transport | 26.9 ft (8.2m) |
with Optional Trailer | 30.8 ft (9.4 m) |
Weight | |
With urethane roll conditioner | 6,969 lb (3,161 kg) |
With V-10 steel roll conditioner | 7,209 lb (3,270 kg) |
With tri-lobe steel roller conditioner | 7,330 lb (3,325 kg) |
With impeller conditioner | 6,785 lb (3,055 kg) |
Standard tires | 31x13.5-15, 8PR |
General | |
Are wrenches required for adjusting? | |
Float | No |
Roll spacing | Yes |