John Deere 635 Side-Pull MoCo

Double tap to zoom



  • Urethane roll conditioner available
  • Cutting platform is gear-driven
  • Adjustable gauge shoes
  • Flotation tires


Model John Deere 635 Mower Conditioner
Power requirements  
PTO speed 1,000 rpm
HP 1000 rpm 1-3/8 in. PTO 90-150 hp (67-112 kW)
Powerline type Double-telescoping Grob spline
Hydraulic pressure required 2,000 psi (13,790 kPa)
Type John Deere
Cutting width 11.5 ft (3.5 m)
Cutting height 1.1 to 3.7 in. ( 28 to 98 mm)
Number of disks 7
Number of knives 14
Disk speed 2,650 rpm
Knife tip speed 191 mph (307 km/h)
Disk drive Gear
Lubrication Hy-Gard oil
Oil reservoir capacity 8.5 qt (8 L)
Cutterbar oil check Drain plug
Cutterbar angle Adjustable
Angle adjustment Mechanical or hydraulic
Cutterbar protection Shearhub
Adjustable gauge shoes Yes
Width 92.7 in. (236 cm)
Diameter 23.4 in. (59.4 cm)
Number of V-tines 57
Number of speeds Two
Drive 3-V powerband belt and sheaves
Conditioner hood Infinite adjust, single hand crank
Width 92.7 in. (236 cm)
Diameter 10 in. (254 mm)
Type of material Urethane
Design Recessed cleat
Speed 664 rpm
Drive Telescoping shaft
Tractor hookup  
Standard hitch Clevis
Ball joint equal angle hitch Optional
Rockshaft swivel hitch Optional
Overall width  
Transport 11.5 ft (3.5 m)
Overall length  
Conventional transport 20.6 ft (6.3 m)
With urethane roll conditioner 5,264 lb (2,388 kg)
With impeller conditioner 4,923 lb (2,233 kg)
Standard tires 11L-15 standard
  31x13.5L 15 optional
Are wrenches required for adjusting?  
Roll pressure Yes
Roll spacing Yes