John Deere 740D
Draper Platforms 740D
Overview:
The 740D is a testament to our legacy of innovation. It’s bigger and even better, and you’ll find that with the 740D, quality and quantity are not mutually exclusive. In other words, harvest with the 740D and you’ll cover more acres and maintain the integrity of your product.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Features
- Windrowing capability with 700D Drapers
- Dual-knife drive system is timed
- Cutterbar is closer to the ground
- Conveniently store optional spare knives
Specifications
| CUTTERBAR | |
| Type | Straight line knife drive system |
| Length | 40.5 ft (12.3 m) |
| Knife drive | Dual knife base |
| Knife speed | 490 cycles/min |
| Cutterbar tilt | Base hydraulic 9 degrees tilt maximum |
| PICKUP REEL | |
| Number of slats | 6 bat poly base |
| Fingers | Nylon |
| Diameter | 42 in. (1,067 mm) |
| Height control | Hydraulic |
| Speed control | Hydraulic |
| Reel lift | Cylinder stroke 13 in. (330 mm); Total range 15.4 in. (391.5 mm) |
| Reel fore and aft | Cylinder stroke 14.1 in. (359 mm); Total range 24.4 in. (620 mm) |
| Reel resume | Base |
| Reel reverse | Base |
| Operating speeds | 6-54 rpm |
| Operating speeds (54-in. reel) | --- |
| SLAT REEL | |
| Number of slats | --- |
| Diameter | --- |
| Height control | --- |
| Speed control | --- |
| Operating speeds | --- |
| DRAPER BELTS | |
| Width | Side belts 40 in. (1,016 mm); Center belts 55 in. (1,397 mm); Center belt not included with SPW configuration |
| Clean height | Cleats 1 in. (25.4 mm) |
| Operating speed | Side belts: variable up to 223 m/min (735 fpm); Center belts 212 m/min (695 fpm); Center belt not included with SPW configuration |
| Speed control | Hydraulic from cab |
| Center belt reverse | Base; Center belt not included with SPW configuration |
| FEED DRUM | |
| Diameter | 16 in. (406 mm); Feed drum not included with SPW configuration |
| Feed drum fingers | Heavy-duty round 16 mm (0.625 in) diameter with breakaway notch and retainer |
| Number of fingers | 18 |
| Auger finger platform | Dual chevron, retracting |
| Finger reach | 6 in. (152 mm) |
| Drum/auger reverse | Base |
| Operating speed | 196 rpm |
| Center clean out door | Base |
| HEADER HEIGHT SENSING | |
| Type | Electro-hydraulic base |
| Header height sensing on the ground | Base |
| Header height sensing off the ground | Base |
| AUXILIARY TOP AUGER | |
| Type | Hydraulic drive, optional |
| DIMENSIONS | |
| Platform length | 42.9 ft (13.1 m) |
| Overall operating depth | 8.2 ft (2.5 m) |
| Transport width, field position | 42.5 ft (12.95 m) |
| Transport width on wheel, less dividers | 8.9 ft (2.7 m) |
| Transport length, hitch extended | 50.4 ft (15.4 m) |
| WEIGHT | |
| Approximate weight (slat reel) | --- |
| Approximate weight (pickup reel) | --- |
| Approximate weight (with transport) | Combine only 8,746 lb (3,967 kg); SPW only 7,423 lb (3,367 kg) |
| Approximate weight (optional 54-in. reel) | --- |
| ADDITIONAL INFORMATION | |
| Date collected | --- |