John Deere 735D
Draper Platforms 735D
Overview:
Performance features of the 735D include taller belt cleats, wider belts, and a larger, 16-inch feed drum. You can even add an optional auxiliary top auger to keep bushy crops moving into the feederhouse.
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Features
The unique dual-knife drive system is timed, creating the smoothest-possible reciprocating knife-drive system currently in the industry. The positive, reliable shaft-driven dual epicyclical in-line knife drives with built-in driveline protection, provide operators with the strongest knife-drive system.
All John Deere 700D Drapers include a double-cut knife which features a hydraulic tilt that is controlled from inside the cab. All 10.6-m (35-ft) and 12.1-m (40-ft) draper cutterbars have knifeback reinforcement straps to strengthen the knifeback.
Reel resume and reverse are features on the 700D Drapers. The combine operator can store two different reel positions with one setting for normal conditions and another for down, tangled, short, or leaning crops.
The 730D, 735D, and 740D Draper models can be equipped with an integrated, slow-speed transport system.
Specifications
| CUTTERBAR | |
| Type | Straight line knife drive system |
| Length | 35.5 ft (10.8 m) |
| Knife drive | Dual knife base |
| Knife speed | 490 cycles/min |
| Cutterbar tilt | Base hydraulic, 9 degrees tilt maximum |
| PICKUP REEL | |
| Number of slats | 6 bat poly base |
| Fingers | Nylon |
| Diameter | 42 in. (1,067 mm) |
| Height control | Hydraulic |
| Speed control | Hydraulic |
| Reel lift | Cylinder stroke 13 in. (330 mm); Total range 15.4 in. (391.5 mm) |
| Reel fore and aft | Cylinder stroke 14.1 in. (359 mm); Total range 24.4 in. (620 mm) |
| Reel resume | Base |
| Reel reverse | Base |
| Operating speeds | 6-54 rpm |
| Operating speeds (54-in. reel) | --- |
| SLAT REEL | |
| Number of slats | --- |
| Diameter | --- |
| Height control | --- |
| Speed control | --- |
| Operating speeds | --- |
| DRAPER BELTS | |
| Width | Side belts 40 in. (1,016 mm); Center belts 55 in. (1,397 mm); Center belt not included with SPW configuration |
| Clean height | Cleats 1 in. (25.4 mm) |
| Operating speed | Side belts; variable up to 223 m/min (735 fpm); Center belts 212 m/min (695 fpm); Center belt not included with SPW configuration |
| Speed control | Hydraulic from cab |
| Center belt reverse | Base; Center belt not included with SPW configuration |
| FEED DRUM | |
| Diameter | 16 in. (406 mm) Feed drum not included with SPW configuration |
| Feed drum fingers | Heavy-duty round 16 mm (0.625 in) diameter with breakaway notch and retainer |
| Number of fingers | 18 |
| Auger finger platform | Dual chevron, retracting |
| Finger reach | 6 in. (152 mm) |
| Drum/auger reverse | Base |
| Operating speed | 195 rpm |
| Center clean out door | Base |
| HEADER HEIGHT SENSING | |
| Type | Electro-hydraulic, base |
| Header height sensing on the ground | Base |
| Header height sensing off the ground | Base |
| AUXILIARY TOP AUGER | |
| Type | Optional, hydraulic drive |
| DIMENSIONS | |
| Platform length | 37.9 ft (11.6 m) |
| Overall operating depth | 8.2 ft (2.5 m) |
| Transport width, field position | 37.5 ft (11.4 m) |
| Transport width on wheel, less dividers | 8.9 ft (2.7 m) |
| Transport length, hitch extended | 45.4 ft (13.8 m) |
| WEIGHT | |
| Approximate weight (slat reel) | --- |
| Approximate weight (pickup reel) | Combine only 7,746 lb (3,514 kg); SPW only 6,423 lb (2,914 kg) |
| Approximate weight (with transport) | Combine only 8,136 lb (3,690 kg); SPW only 6,813 lb (3,091 kg) |
| Approximate weight (optional 54-in. reel) | --- |
| ADDITIONAL INFORMATION | |
| Date collected | --- |