John Deere 630D
Draper Platforms 630D
Overview:
You’ll appreciate the smooth, vibration-free cutting performance the shaft-driven in-line dual knife drive system provides, standard on the 630D.
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Features
- Windrowing capability with 600D Drapers
- Dual-knife drive system is timed
- Cutterbar is closer to the ground
- Stainless-steel feed floor
Specifications
| MODEL | John Deere 630D Draper |
| CUTTERBAR | |
| Type | Straight line knife drive system |
| Length | 30.5 ft (9.3 m) |
| Knife drive | Dual knife base, single optional (for combine use only) |
| Knife speed | 490 cycles/min |
| Cutterbar tilt | Base hydraulic, 9 degrees tilt maximum |
| PICKUP REEL | |
| Number of slats | 6 bat poly base, 6 bat steel optional |
| Fingers | Nylon base, steel optional |
| Diameter | 42 in. (1,067 mm) |
| Height control | Hydraulic |
| Speed control | Hydraulic |
| Reel lift | Cylinder stroke 13 in. (330 mm); Total Range 15.4 in. (391.5 mm) |
| Reel fore and aft | Cylinder stroke 14.1 in. (359 mm); Total range 24.4 in. (620 mm) |
| Reel resume | Base |
| Reel reverse | Base |
| Operating speeds | 6-54 rpm |
| Operating speeds (54-in. reel) | |
| SLAT REEL | |
| Number of slats | |
| Diameter | |
| Height control | |
| Speed control | |
| Operating speeds | |
| DRAPER BELTS | |
| Width | Side belts 40 in. (1,016 mm); Center belts 55 in. (1,397 mm); Center belt not included with SPW configuration |
| Clean height | 1 in. (25.4 mm) |
| Operating speed | Side belts: variable up to 223 m/min (735 fpm); Center belts: 212 m/min (695 fpm); Center belt not included with SPW configuration |
| Speed control | Hydraulic from cab |
| Center belt reverse | Base; Center belt not included with SPW configuration |
| FEED DRUM | |
| Diameter | 16 in. (406 mm); Feed drum not included with SPW configuration |
| Feed drum fingers | Heavy duty round 0.625 in. (16 mm) diameter with breakaway notch and retainer |
| Number of fingers | 18 |
| Auger finger platform | Dual chevron, retracting |
| Finger reach | 6 in. (195 mm) |
| Drum/auger reverse | Base |
| Operating speed | 195 rpm |
| Center clean out door | Base |
| HEADER HEIGHT SENSING | |
| Type | Electro-hydraulic base |
| Header height sensing on the ground | Base |
| Header height sensing off the ground | Base |
| AUXILIARY TOP AUGER | |
| Type | Optional hydraulic drive |
| DIMENSIONS | |
| Platform length | 32.9 ft (10.0 m) |
| Overall operating depth | 8.2 ft (2.5 m) |
| Transport width, field position | 32.5 ft (9.9 m) |
| Transport width on wheel, less dividers | 8.9 ft (2.7 m) |
| Transport length, hitch extended | 40.4 ft (12.3 m) |
| WEIGHT | |
| Approximate weight (slat reel) | |
| Approximate weight (pickup reel) | Combine only 6,855 lb (3,109 kg); SPW only 5,532 lb (2,509 kg) |
| Approximate weight (with transport) | Combine only 7,245 lb (3,286 kg); SPW only 5,922 lb (2,686 kg) |
| Approximate weight (optional 54-in. reel) | |
| ADDITIONAL INFORMATION | |
| Date collected |