John Deere 625D

Features
- Windrowing capability with 600D Drapers
- Double-cut knife system produces a cleaner cut
- Dual-knife drive system is timed
- Cutterbar is closer to the ground
Specifications
Model | John Deere 625D Draper |
CUTTERBAR | |
Type | Straight line knife drive system |
Length | 25.5 ft (7.8 m ) |
Knife drive | Base single, optional dual knife (combine use only)Base dual knife (SPW only or SPW/combine combination use) |
Knife speed | 490 cycles/min (1,040 spm) |
Cutterbar tilt | Base Hydraulic, 9 degrees tilt maximum |
PICKUP REEL | |
Number of slats | 6 bat poly base; 8 bat steel optional (for forage conditions) |
Fingers | Nylon (steel optional, typically used in rice or forage conditions) |
Diameter | 42 in. (1,067 mm); For rice or forage conditions 54 in. (1,371 mm) |
Height control | Hydraulic |
Speed control | Hydraulic |
Reel lift | Cylinder stroke 13 in. (330 mm); Total range 15.4 in. (391.5 mm) |
Reel fore and aft | Cylinder stroke 14.1 in. (359 mm); Total range 24.4 in. (620 mm) |
Reel resume | Base |
Reel reverse | Base |
Operating speeds | 6-54 rpm |
Operating speeds (54-in. reel) | 5-44 rpm |
SLAT REEL | |
Number of slats | |
Diameter | |
Height control | |
Speed control | |
Operating speeds | |
DRAPER BELTS | |
Width | 0.7 L (24 oz) rubber coated polyester with V-Guide tracking; Side belts 40 in. (1,016 mm); Center belts 55 in. (1,397 mm); Center belt not included with SPW configuration |
Clean height | 1 in. (25.4 mm) |
Operating speed | Side belts: variable up to 223 m/min (735 fpm); Center belts: 212 m/min (695 fpm); Center belt not included with SPW configuration |
Speed control | Hydraulic from cab |
Center belt reverse | Base; Center belt not included with SPW configuration |
FEED DRUM | |
Diameter | 16 in. (406 mm); Feed drum not included with SPW configuration |
Feed drum fingers | Steel heavy-duty round 16 mm (0.625 in) diameter with breakaway notch and retainer |
Number of fingers | 18 |
Auger finger platform | Dual chevron, retracting |
Finger reach | 6 in. (152 mm) |
Drum/auger reverse | Base |
Operating speed | 195 rpm |
Center clean out door | Base |
HEADER HEIGHT SENSING | |
Type | Electro-hydraulic base |
Header height sensing on the ground | Base |
Header height sensing off the ground | |
AUXILIARY TOP AUGER | |
Type | Optional hydraulic drive |
DIMENSIONS | |
Platform length | 27.9 ft (8.5 m) |
Overall operating depth | 7.9 ft (2.4 m) |
Transport width, field position | 26.5 ft (8.1 m) |
Transport width on wheel, less dividers | |
Transport length, hitch extended | |
WEIGHT | |
Approximate weight (slat reel) | |
Approximate weight (pickup reel) | Combine only 6,359 lb (2,884 kg); SPW only 5,036 lb (2,284 kg) |
Approximate weight (with transport) | |
Approximate weight (optional 54-in. reel) | Combine only 6,556 lb (2,974 kg); SPW only 5,234 lb (2,374 kg) |
ADDITIONAL INFORMATION | |
Date collected |