John Deere 622 Flex Cutting Platform
Auger Platforms 622 Flex Cutting Platform
Overview:
622 Flex Cutting Platform
With the 622 Flex Cutting Platform, you'll benefit from four-inch double-cut knives that provide both increased cutting capacity and harvesting speed.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Features
- Epicyclic knife drive to increase drive capacity
- Safe and damage-free storage
- Raised-height skid shoe
- Perma-Glide™ floating divider points
Specifications
| Manufacturer | John Deere |
| Model | 622F |
| Cutterbar | |
| Type | Knife system with in-line gearbox 102 mm (4 in.) |
| Cutterbar angle | 10 degree (angle) |
| Cutterbar length, ft. (m) | 6.7 m (22 ft) |
| Flex cutterbar float range, in. (mm) | 152 mm (6 in.) |
| Tilt adjustment | 17 (located on feederhouse) degree (angle) |
| Knife sections | Heavy-duty, over-serrated |
| Guards | Forged steel, heat-treated |
| Backshaft speed, rpm | 490 rpm |
| Knife speed, cycles/min. | 520 cycles/min |
| Platform auger | |
| Diameter, in. (mm) | 660 mm (26 in.) |
| Operating speed, rpm | Slow down 135, 152 rpm /Speedup 170 rpm |
| Reel | |
| Number for slats | 6 |
| Diameter, in. (mm) | 1,067 mm (42 in.) |
| Reel controls | |
| Height control | Hydraulic |
| Speed control | Hydraulic |
| Operating speeds, rpm | 6-44 rpm |
| Hydraulics | |
| Reel motor displacement (per revolution), cu. in. (L) | --- |
| Reel drive system pressure, psi (kPa) | 14,000 (+/- 1,000) kPa : 2,000 (+/- 150) psi |
| Reel fore/aft stroke, in. (mm) | 359 mm (14.1 in.) |
| Dimensions | |
| Cutting width, ft. (m) | 6.7 m (22 ft) |
| Gathering width, ft. (m) | 6.8 m (22.1 ft) |
| Overall width, ft. (m) | 7.5 m (23.7 ft) |
| Approximate weight, lb. (kg) | 1,912 kg (4,215 lb) |