John Deere TE 4x2 Electric
Turf Utility Vehicles TE 4x2 Electric
Overview:
Quiet electric operation
Wide stance for enhanced stability
Best in class cargo box
Zero emissions/zero fuel consumption
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Features
- On-board battery charger
- Drive system provides plenty of power to accelerate faster and climb hills better
- Features operating conveniences such as high-back cushioned seats, glove box, and automotive-style controls
- Durable deluxe cargo box is spacious and allows for easy loading and unloading
- Heavy-duty frame
Specifications
| MODEL | John Deere TE 4x2 Electric Utility Vehicle |
| DRIVE SYSTEM | |
| Motor | Wound direct drive, 48VDC separately excited |
| Controller | Separately excited, 400 amp max., Anti-roll away braking and alarm. Anti-stall motor protection. Regenerative braking. Diagnostic indicator. Full torque, reduced speed reverse. |
| Transaxle | 16.99:1 ratio with helical gearing |
| Electrical system | 48 volt w/8 Trojan T-145 batteries |
| Speed | 0-15 mph (Can be adjusted with handheld programmer) 24.1 km/h |
| Gear selection | Forward, Neutral, Reverse |
| Torque converter | N/A |
| Battery | Trojan T-145 |
| Extended run time battery | Not Available |
| BRAKES | |
| Type | Dual rear wheel mechanical drum |
| Park brake | Hand operated, multi-latch |
| TIRES | |
| Front | 2 - 22x9.5-10, 4-ply high-flotation turf |
| Rear | 2 - 24x12-10, 4-ply high-flotation turf |
| SUSPENSION AND STEERING | |
| Front | Total Trave l5 in. (127 mm); Independent, spring over shock, single A-arm |
| Rear | Total travel: Not Available; 2 hi-flotation, low pressure tires |
| Steering | Rack and pinion |
| DIMENSIONS | |
| Height | 44.5 in.(1130 mm) |
| Width | 60 in. (1524 mm) |
| Length | Without bumper 104.9 in. (2664 mm); With bumper 107.4 in. (2728 mm) |
| Ground Clearance | Under transaxle: Not Available; Under foot platform 7.3 in. (185 mm) |
| Front tread centers | 50 in. (1270 mm) |
| Rear tread centers | 48 in. (1219 mm) |
| Wheelbase | 69.7 in. (1770 mm) |
| Vehicle weight | 1470 lb w/ batteries (667 lg w/ batteries) |
| Turning clearance circle | 24.1 ft (7.3 m) |
| Payload capacity | 900 lb (408 kg) |
| Towing capacity | 500 lb (227 kg) |
| SEATS | |
| Type | Professional high back bucket, tilt forward |
| Seating capacity | 2 |
| Seat adjustment | Optional |
| CARGO BOX | |
| Length | 45 in. (1143 mm) |
| Width | 52 inside in. (1321 inside mm) |
| Depth | 12 in. (304.8 mm) |
| Capacity | 500 lb (227 kg) |
| Volume | 16.4 cu ft (0.46 m3) |
| Height above ground | 30 in. (762 mm) |
| Material | Polypropylene side panels and tailgate; steel floor and load guard |
| Tailgate | Hinged at bottom, removable; side panels are removable |
| Dump | Manual, power lift (optional) |
| GROUND PRESSURE | |
| With 200 lb. operator only | 8.6 psi (fully loaded) |
| FRAME | |
| Type | Mig welded uni-body, high strength steel |
| CHARGER | |
| Type | High frequency switched-mode |
| Input voltage | 85-265 VAC @ 45-65 HZ |
| Input amperage (Nominal) | 9.5 amp @ 120 VAC or 5 amp @ 230 VAC |
| Output voltage | 48 VDC nominal |
| Output amperage | 18 amps DC maximum |
| AC input connector | IEC320/C14 |
| AC power cord | 1.8 m (972 in.) or longer, 16 AWG minimum |
| MACHINE | |
| Other standard features | Battery discharge indicator, reverse warning indicator, operator presence switch, hour meter, headlight switch, two cup holders, glove box |
| FENDERS AND HOOD | |
| Type | TPO - Rubber and Polypropylene |
| ADDITIONAL INFORMATION | |
| Date collected |