Features
Dual wheels provide consistent disking depth
Distributes weight evenly during transport
The TM51 Series Tandem Disk Harrow comes standard equipped with dual wheels for consistent disking depth.
The dual wheels provide additional stability for even weight distribution during transport.
NOTE: TMD5129 and TM5132 have 12 wheels total; six on the center section and three on each of the wing sections.
End washers and wrenches keep gang shaft end nut tight
Keeping gangs tightened increases wear life
Gang nut wrenches are always there when needed
End washers help keep the gang shaft end nut tightened during operation, increasing gang wear life.
Two gang nut wrenches are supplied with each unit and securely attached to the unit, ready to use when the gangs need tightening.
Hydraulic wing control
Hydraulic wing control and gauge
Hydraulic wing control is standard equipment on all Frontier™ TM51 Series Tandem Disk Harrows. A control valve allows varying hydraulic pressure to the wing-fold cylinders. It transfers weight from the mainframe to the wings to improve penetration in hard ground and/or heavy soils. Increasing pressure to the rod end of the cylinder holds the wing level to prevent gouging in soft or moist soils.
The pressure relief feature allows wings to flex over obstacles to help prevent damage to the cylinder rod. Convenient knob adjustment can be easily reached from the front of the disk. The indicator gauge provides the operator with a quick visual indication of the results of the adjustment.
NOTE: Requires a tractor with closed-center hydraulics. Operators must follow special operating instructions per the operator's manual.
Oil-bath disk gang bearings provide extended wear life
Consistent lubrication and longer life
Oil-bath disk gang bearings with a standard wear plate allow consistent lubrication and prolong bearing life with minimal maintenance.
This feature ultimately saves both time and money.
Overlapping front gangs eliminate need for middle breaker
Provides more level soil profile
The front gangs overlap, eliminating the need for a middle breaker.
This provides a more-level soil profile, ensuring complete coverage on each pass.
Standard pintle hitch ensures a solid pull of disk
Pintle hitch
Safely transport the TM51 Series Tandem Disk Harrow from the farm to the field easily with the standard pintle hitch.
Two-blade taper creates level soil surface
Two-blade taper
A two-blade taper, including the furrow filler on the outside rear wing, reduces outside ridges and smooths out the soil to create a level soil surface.
Transport locks provide secure transport
Secure locking when transporting
Transport locks secure the unit for transport mode.
Transport width
Two separate control arms create consistent performance
Controls arms level in ground and during transport
Two separate control arms are standard, one for transport leveling and one for leveling while the disk is in the ground.
Once set for a given soil condition, the disk will continue to perform with consistency.
Transport
| Width | 4.2 m 13.67 ft, in. |
|---|---|
| Ground clearance with base blades | 20.3 cm 8 in. |
| Wheel hub bearings | Dual Tapered Roller Bearings |
| Height | 4 m 13.2 ft |
| Length | 8.5 m 28 ft |
Working
| Approximate working width | 7.2 m 23.5 ft, in. |
|---|---|
| Maximum penetration | 22.9 cm 9 in. |
Weight
| Net | 7842.6 kg 17290 lb |
|---|---|
| Weight per disk blade | 145.1 kg 320 lb |
Tractor requirements
| Recommended drawbar hp range | 164.1+ kW 220+ hp |
|---|
Frame
| Type | Tandem double offset |
|---|---|
| Duty | General Purpose |
| Tube size | 15.2x10.2x0.95 cm 6x4x0.375 in. |
Hitch
| Front hitch type | Spade |
|---|
Disk blades
| Spacing | 26.7 cm 10.5 in. |
|---|---|
| Quantity | 58 |
| Type | Notched (front) Notched (rear) Standard Smooth (front) Smooth (rear) Optional Notched (front) Smooth (rear) Optional |
| Blade concavity | Standard: high Optional: low |
Available blade sizes
| Blade option one | 660x7.9 mm 26x0.312 in. |
|---|---|
| Blade option two | 711x7.9 mm 28x0.312 in. |
Disk gangs
| Front angle | 3 Positions |
|---|---|
| Rear angle | 3 Positions |
| Axle size | 4.1 cm 1.625 in. or 5.4 cm 2.125 in. |
| Axle material | Round heat treated alloy steel, threaded on both ends |
| Bearing type | Oil bath tapered roller |
| Bearing wear plates | Standard |
| Bearing standards | Welded, reinforced |
| Scrapers | Adjustable |
Lighting and safety
| Markings | SMV |
|---|---|
| Safety tow chain | Yes |
| Lights | Yes |
Tires
| Type | Eight implement |
|---|---|
| Size | 11L x 15 in. 8 ply |
| Wheel hub type | 8 Bolt |
Set-up time
| Labor hours | 4 - 6 for two people |
|---|
Warranty
| Time period | 1 year |
|---|