John Deere H240 MSL
Double tap to zoom
Single-point hydraulic connection saves time
The H240, H260, and H310 Loaders can be ordered with a single-point hydraulic connection that also incorporates the connection point for any electrical needs. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.
Boom lockout for easy service
A hydraulic shut-off valve is included with the H-Series Ag Loaders to ensure the loader does not lower suddenly. For example, this allows the boom to be locked out when someone is required to be located under the loader boom for service work on the tractor. It should not be used for extended periods of time unless an appropriate support stand is also utilized.
False rod bucket cylinders improve productivity
Fast bucket cycle times are important to dump the load from the bucket as quickly as possible, (quite often) in order to be as productive as possible, while completing loading operations. The bucket cylinder design can have a major impact on this cycle time, especially for the mechanical self-leveling loaders.
Therefore, all MSL H-Series Loaders utilize false rod bucket cylinders. A false rod cylinder has a smaller displacement of oil requirement on the head end of the cylinder, which allows this cylinder to dump much faster than a normal cylinder.
Loader removal (parking) made easy
John Deere loaders are easily removed and reinstalled on tractors without tools. The parking system allows removing or attaching the loader to the tractor in minutes without the need for tools.
To remove or park the loader, apply slight down pressure to the loader boom with the bucket dumped at approximately a 30-degree angle. With the tractor in park, lower the parking stands and place the mast pins in the open position.
|Front tire||320/85 R24 BKT (12.4 R24)|
|Rear tire||18.4 R30|
|Front axle configuration||---|
|Pump capacity||11 gpm|
|Rated pressure||2828 psi|
|Leveling configuration||Mechanical Self Leveling (MSL)|
|Bucket used||General Purpose 1850 mm (73 in.)|
|Bucket weight||178 kg (392 lb)|
|Lift capacity at full height||Measured at pivot (U) 1182 kg (2606 lb); Measured at 800 mm ahead of pivot (V) 1280 kg (2822 lb)|
|Lift capacity at 59 in. (1500 mm)||Measured at pivot (W) 1611 kg (3552 lb); Measured at 800 mm ahead of pivot (X) 1584 kg (3492 lb)|
|Boom breakout force||Measured at pivot (Y) 2174 kgf (4793 lbf); Measured at 800 mm ahead of pivot (Z) 1836 kgf (4048 lbf)|
|Bucket rollback force capacity||At maximum height (VV) 1884 kgf (4154 lbf); At 59-in. (1500-mm) lift height (XX) 3095 kgf (6823 lbf); At ground-level line (ZZ) 3058 kgf (6742 lbf)|
|Dimensions||Maximum lift height (A) 3343 mm (132 in.); At full height - bucket level (B) 3148 mm (124 in.); At full height - bucket dumped (C) 2493.1 mm (98.2 in.)|
|Overall length (I+F), ft (m)||4.5 m (14.7 ft)|
|Overall height in carry position (J)||---|
|Digging depth (H)||93 mm (3.7 in.)|
|Reach||At maximum height (D) 780.0 mm (30.7 in.); At ground level - bucket level (F) 2171 mm (85.5 in.)|
|Bucket angle||Dump angle, degrees (E) -57.7 degree (angle); Rollback angle, degrees (G) 43 degree (angle); Dump angle, ground -109 degree (angle)|
|Cycle times||Loader raise, seconds 3.3 seconds; Loader lower, seconds 2.2 seconds; Bucket dump, seconds 2.6 seconds; Bucket rollback, seconds 2.6 seconds|