John Deere 512 NSL

Double tap to zoom

 

Features

Changing attachments

The John Deere quick-change attachment carrier allows one person to quickly change attachments without the use of tools.

With the bucket level or slightly rolled back, simply remove the retaining pins and place in storage position.

Roll the attachment forward to disengage the lower pins.

Lower the attachment to the ground to disengage the top hooks.

Back away.

To install another attachment simply reverse these steps.

Specifications

TRACTOR ---
Model 5045D/5055D
Front tire 7.5-16 6 PR R1
Rear tire 13.6-28 6 PR R1
Front axle configuration ---
Wheelbase ---
Pump capacity 11.4 gpm
Rated pressure 2828 psi
LOADER ---
Leveling configuration ---
Bucket used 1850 mm (73 in.)
Bucket weight 159 kg (351 lb)
Lift capacity at full height Measured at pivot (U) 1115 kg (2453 lb); Measured at 800 mm ahead of pivot (V) 718 kg (1850 lb)
Lift capacity at 59 in. (1500 mm) Measured at pivot (W) 1471 kg (3236 lb) Measured at 800 mm ahead of pivot (X) 1065 kg (2343 lb)
Boom breakout force Measured at pivot (Y) 2170 kg (4775 lb); Measured at 800 mm ahead of pivot (Z) 1474 kg (3250 lb)
Bucket rollback force capacity At maximum height (VV) 1022 kg (2248 lb) At ground-level line (ZZ) 1432 kg (3151 lb)
Dimensions Maximum lift height (A) 2985 mm (114 in.); At full height - bucket level(B) 2708 mm (106 in.); At full height - bucket dumped (C) 2172 mm (85 in.)
Overall length (I+F), ft (m) 3.68 m (12.083 ft)
Overall height in carry position (J) 1.442 m (4.75 ft)
Digging depth (H) 75 mm (3 in.)
Reach At maximum height (D) 667 mm (26 in.); At ground level - bucket level (F) 1730 mm (68 in.)
Bucket angle Dump angle, degrees (E) 57 degree (angle); Rollback angle, degrees (G) 23 degree (angle)
Cycle times ---