John Deere E100
Double tap to zoom
Two-year or 120-hour bumper-to-bumper warranty is standard
An exclusive 2-year or 120-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere 100 Series Tractors. The warranty is hassle free, with one company handling all of the paperwork. Premium features of 100 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors. *Term limited to years or hours used, whichever comes first, and varies by model.
Serviceability is convenient with an easy-open hood
The one-piece hood opens easily to permit checking and servicing the engine:
Important service points are located within easy reach.
A service interval decal is provided inside the tractor hood for convenience when servicing the tractor.
Hourmeter includes a service reminder feature that flashes for two hours when a lubrication or mower/engine service interval has been reached.
The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.
The seat tilts up and out of the way to make adding fuel easy.
The 100 Series Tractors are covered by a 2-year/120-hour bumper-to-bumper warranty*:
Premium features of 100 Series Tractors allow for this long warranty period.
*Term limited to years or hours used, whichever comes first, and varies by model.
Instruments and controls are easy to find and convenient to use
The contoured dash has clean, attractive styling:
Controls are color-coded and labeled for easy identification by the operator.
Controls are logically placed and easy to reach.
The hourmeter makes it easy to tell when oil changes and other maintenance should be performed.
The service reminder feature will indicate that a general lubrication or mower/engine service interval has been reached.
When service is required, arrows will periodically flash for two hours.
Functional design of the controls provides good appearance and a comfortable feel.
A spring-assisted, low-effort lift lever simplifies setting and adjusting the mower cut height:
Increments of 0.25-in. (0.64-cm) allow for fine-tuning the cut height.
Cut height is adjustable from 1-in. (2.5 cm) to 4 in. (10.2 cm).
|John Deere E100 Lawn Tractor|
|Power||"17.5 hp 13kW|
|Displacement||"30.5 cu in. 500 cc|
|Type||Overhead valve, full-pressure lube, oil filter|
|Choke/speed control||One lever|
|Oil drain||No tools|
|Fuel delivery||Pulse pump and carburetor|
|Fuel gauge||Mechanical, viewable from seat|
|Fuel tank location||Rear|
|Fuel fill opening||"Center, 1.75 in. 4.45cm|
|Fuel tank capacity||"2.4 U.S. gal. 9.1 L|
|Battery||"12 V 300 CCA|
|Charging system||Regulated, 9 amp|
|Engine starter||Bendix type|
|Hourmeter||Yes, with service reminder|
|Headlights||Two standard, incandescent|
|Taillights or reflector||No|
|Rear work lights||No|
|Type||Automatic, continuously variable transmission (CVT)|
|Oil filter||Not applicable|
|Forward speed||"0-5.5 mph 0-8.9 km/h*|
|Reverse speed||"0-3.2 mph 0-5.1 km/h|
|Frame||Full-length welded steel|
|Weight bracket||Optional rear|
|Front axle||Cast-iron front axle, powdered-metal front wheel bushings|
|Hood material||JD Loy, UV resistant|
|Fender deck material||Stamped steel|
|Floor mats||Yes, with debris removing channels|
|Service interval decal||Yes|
|Equipment mounting||CargO Mount™ system|
|Type||Sector and pinion with single drag link and tie rod|
|All-wheel steer||Not available on this model|
|Steering wheel||Standard, diameter - 12 in. 30.5 cm|
|Tilt steering wheel||No|
|Turning radius||18 in. 45.7 cm|
|Uncut circle radius||25 in. 63.5 cm|
|Seat back height||11 in. 27.9 cm|
|Fore-aft adjustment||"While seated, 5.5 in. 14 cm|
|Seat suspension||Tilt, two coil springs|
|Type||Lever on fender deck|
|Mower cut height||13 positions, 1-4 in. 2.5-10.2 cm|
|Cut height increments||0.25 in. 0.64 cm|
|Preset cut height||No|
|Cutting width||42 in. 107 cm|
|Construction||Stamped steel deck shell|
|Mower deck material||Steel, 13 gauge 0.09 in. 2.3 mm
|Mower wash port||Yes|
|Mower drive system||Manual power take-off (PTO)|
|Mower wheel adjustment||One bolt|
|Mower level adjustment||Easy-level deck|
|Type||Slide under tractor|
|Front draft arms||One spring clip|
|Rear draft arms||Two spring clips|
|Mower wheels rotate||No|
|Drive system||Single belt|
|Meets ANSI standard||Yes|
|Meets OPEI standard||Yes|
|Backup protection||Reverse Implement Option (RIO)|
|Notes||"JD Loy hood resists fading, won't rust or dent. Durable primer and powder paint finish. Full-length welded steel frame|
|Warranty||2 year/120 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)|
|Mowers||Standard, 42 in. 107 cm|
|Rear bagger||2-bag, 6.5 bu 229 L|
|Powered material collection|
|Mulching system||Mulch cover or high-performance plug|
|Front blade||46 in. 116.8 cm|
|Snow blower||Two-stage, 44 in. 111.8 cm|
|Rear power take-off (PTO)|
|Sprayer||Tow-behind, 15 U.S. gal. 56.8 L Mounted, 15 U.S. gal. Tow-behind only, 25 U.S. gal. 94.6 L|
|Spreader||"Tow-behind only, 125-175 lb 57.7-80 kg|
|Front bumper||Two-bar styled front bumper|
|Weather protection||Snow cab|
|Rear receiver hitch|
|Bucket holder||Yes, single bucket|
|Grass striping||Lawn striping kit|
|Height||40.2 in. 102 cm|
|Overall length||68.8 in. 174.8 cm|
|Wheelbase||48.9 in. 124.2 cm|
|Width with mower||54.9 in. 139 cm|
|Width with mower (deflector raised for storage)||44.8 in. 114 cm|
|Width without mower|
|Weight||Mower, no fuel, 427 lb 194 kg|