Commercial Worksite PA40 Planetary Drive Auger

Double tap to zoom

 

Features

Our auger attachments easily get to the bottom of things. The heavy-duty motor drives the auger through a planetary-gear reduction. Reverse rotation allows quick back-out when you encounter obstructions.

  • New hydraulic motors have a higher-rated operating pressure and features a larger and more durable motor-shaft seal.
  • New integral motor and planetary gearbox housing brings the planetary gear set closer to the motor, increasing efficiency and decreasing stress.
  • Gearbox has an updated input shaft with a more sturdy design.
  • Maximum torque rating for PA30B increased from 4,166 to 4,500 ft.-lb. and improved gear reduction. The number of planet gears in the PA30B gearbox increased from three to five.
  • PA40 bit sizes include 4-36-in. HD, 9-24-in. HD difficult ground, 18-36 in, tree and shrub, and 9- or 12-in. rock to match the application.
  • Like all worksite pro attachments, these augers  are optimized to work with the John Deere skid steer loaders, compact track loaders (CTLs), compact excavators, and compact wheel loaders, and are compatible with most competitive models.

Specifications

Model PA40B
Weight (without mounting bracket) 89kg (195 lbs.)
Motor Displacement 310 cc/rev (19.2 cu. in./rev.)
Hydraulic Flow Minimum: 106 L/min. (28 gpm) ; Maximum 159 L/min. (42 gpm)
Maximum Operating Pressure 24 100 kPa (3,500 psi)
Planetary Gear Ratio 6:0:1
Planetary Maximum Torque Rating 6780 Nm (5,000 ft.-lb.)
Output Shaft  51-mm (2 in.) hexagon
Output Torque 7250 Nm (5,347 ft.-lb.)
Output Speed  
23L/min. (6 gpm) 
30 L/min. (8 gpm) 
38 L/min. (10 gpm):  
45 L/min. (12 gpm)  
57 L/min. (15 gpm) 
68 L/min. (18 gpm)  
76 L/min. (20 gpm) 
106 L/min. (28 gpm) 
56 rpm
114 L/min. (30 gpm) 
60 rpm
124 L/min. (33 gpm) 
66 rpm
136 L/min. (36 gpm) 
72 rpm
148 L/min. (39 gpm) 
78 rpm
159 L/min. (42 gpm) 
84 rpm
Maximum Auger Bit Diameter 910 mm (24 in.)
Overall Auger Bit Length 1220 mm (48 in.)
Vehicle Compatibility 330G and 332G Skid Steers; 331G and 333G CTLs; and 244K-II and 324K Compact Loaders