John Deere 8320RT

Double tap to zoom

 

Features

  • 320 Engine hp
  • John Deere PowerTech™ 9.0L PSS
  • Choice of e23™ PowerShift, or Infinitely Variable Transmission (IVT™)
  • CommandView™ III cab featuring the Generation 4 CommandCenter™

Specifications

Model John Deere 8320RT
OFFICIAL TEST  
Nebraska Test number TBD Nebraska Test
ENGINE  
Manufacturer John Deere
Engine family 9.0L: EJDXL09.0301
Aspiration Dual turbochargers, variable geometry turbo with fixed geometry turbo in series
Cylinders/Displacement, cu. in. (L) 6 cylinders/ 9.0 L549 cu in.
Cylinder Liners Wet
Fuel tank capacity, US Gal. (L) (Open; Cab) Standard 758 L200 gal.
PERFORMANCE  
Advertised PTO hp (kW) @ Rated rpm At 2100 per SAE: 196 kW 264 hp
Advertised Engine hp (kW) @ Rated speed AT 2100 per 97/68EC PS: 235 kW 320 hp
TRANSMISSION  
Std. Transmission; Forward/Reverse IVT
Opt. Transmission; Forward/Reverse IVT
Reverser Left-hand or Right-hand
On-the-Go Shifting (Yes/No/Partial) Yes
Clutch; Wet/Dry Wet
Creeper IVT
POWER TAKE-OFF (PTO)  
Standard 45 mm 1.75 in. 20 spline, 1000 rpm
Optional  
PTO Speeds @ Engine rpm At 2000 rpm: 1000 rpm
PTO Actuation Electrohydraulic
HYDRAULICS  
Type Closed-center, pressure/flow compensated
Pump Rated Output, GPM (L/min.) Standard227.1 L/min 60 gpm Optional 321 L/min 85 gpm
Rated Flow @ One SCV, GPM (L/min.) Rear coupler: 12.7 mm 0.5 in.132 L/min35 gpm Rear coupler: 19.1 mm 0.75 in.153 L/min 40.5 gpm
Maximum Operating Pressure, psi (kPa) 20,400 (+ or - 300) kPa  2,958 psi
Hitch Draft Control Load Sense Type Electronic
Remote Control Valves Available Standard: four  Optional: five or six
Hitch Category (SAE Designation) Cat 4N/3
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. Standard Cat 4N/3: 6803 kg 15000 lb  Optional Cat 4N/3: 9,702 kg 20,000 lb
Sensing type Electrohydraulic
Joystick SCV control Electrohydraulic optional
FINAL DRIVE  
Type Inboard planetary
Engage On-the-Go Rear Differential Lock Yes
Axle Type Bar
Brakes, Type and Control Hydraulic wet disc
OPERATOR STATION  
Rollover Protective Structure, OOS Gearshift Location - Console/Floor CommandARM
Cab Doors LH Platform - Flat/Straddle Flat Seat Suspension System Air standard
4WD DIMENSIONS  
Wheelbase, in. (mm) 2515 mm 99 in.
Wheel Tread, Min. to Max. in. (mm) Standard: 1829-3048 mm 72-120 in. Optional: 2845-4064 mm 112-160 in.
Unballasted Weight, lb (kg) IVT with: fuel, 113.6 L30 gal.Tracks: 635 mm 25 in. No weights: 16,578 kg 36,549 lb
STANDARD TIRES  
Track widths Standard: 635 mm 25 in. Optional: 406 mm 16 in. 457 mm 18 in. 610 mm 24 in. 762 mm 30 in.
MISCELLANEOUS  
Country of Manufacture Waterloo, IA USA
Ballasting Restrictions, lb (kg) Refer to operator's manual
*Notes