John Deere 630 Side-Pull MoCo

Double tap to zoom

 

Features

  • Urethane roll conditioner available
  • Cutting platform is gear-driven
  • Adjustable gauge shoes
  • Flotation tires

Specifications

Model John Deere 630 Mower Conditioner
Power requirements  
PTO speed 540 or 1,000 rpm
HP 1000 rpm 1-3/8 in. PTO 65-150 hp (48-112 kW)
Power-line type Double-telescoping Grob spline
Hydraulic pressure required 2,000 psi (13,790 kPa)
Cutterbar  
Type John Deere
Cutting width 9.75 ft (3.0 m)
Cutting height Without extension: 1.1 to 3.7 in. ( 28 to 98 mm)
Number of disks 6
Number of knives 12
Disk speed 2,650 rpm
Knife tip speed 191 mph (307 km/h)
Disk drive Gear
Lubrication Hy-Gard oil
Oil reservoir capacity 7.4 qt (7 L)
Cutterbar oil check Drain plug
Cutterbar angle Adjustable
Angle adjustment Mechanical or hydraulic
Cutterbar protection Shearhub
Adjustable gauge shoes Yes
Conditioner  
Impeller Width
Width 73 in. (1,854 mm)
Diameter 594 mm (23.4 in.)
Number of V-tines 45
Number of speeds Twp
Drive 3-V power-band belt and sheaves
Conditioner hood Infinite adjust, single hand crank
Rolls  
Width 73 in. (1,854 mm)
Diameter 10 in. (254 mm)
Type of material Urethane
Design Recessed cleat
Speed 664 rpm
Drive Telescoping shaft
Tractor hookup  
Standard hitch Clevis
Ball joint equal angle hitch Optional
Rockshaft swivel hitch Optional
Dimensions  
Overall width  
Transport 9.75 ft (3 m)
Overall length  
Conventional transport With equal angle tongue: 20.5 ft (6.2 m)
Weight  
With urethane roll conditioner 5,012 lb (2,273 kg)
With impeller conditioner 4,696 lb (2,130 kg)
Standard tires 11L-15 standard
  31x13.5L 15 optional
General  
Are wrenches required for adjusting?  
Roll pressure Yes
Roll spacing Yes